0910RtnSrvXprs

2009 – 2010 Routan
Engine
Part
Part Number
Quantity
7B0-115-561
1
3.8L V6:
CGUA
Oil Filter
SAE 5W-20 (API Certified)
Engine oil is recommended
for all operating temperatures
Drain Plug With Gasket
N/A
4.7L (5.0qt)
7B0-103-624
1
Air Filter
7B0-129-620
1
Driver's Wiper Blade
7B0955425A
1
Passenger's Wiper Blade
7B0-955-426
1
Rear Wiper Blade – Plastic
7B0-955-427-A
X
Rear Wiper Blade – Metal
7B0-955-427-B
X
Part
Part Number
Quantity
Oil Filter
7B0-115-561-C
1
SAE 10W-30 (API Certified)
Engine oil is recommended
for all operating temperatures
N/A
5.2L (5.5qt)
Drain Plug With Gasket
7B0-103-193
1
Pollen Filter (12K Only)
7B0-819-644
1
Air Filter
7B0-129-620
1
Driver's Wiper Blade
7B0955425A
1
Passenger's Wiper Blade
7B0-955-426
1
Rear Wiper Blade – Plastic
7B0-955-427-A
X
Rear Wiper Blade – Metal
7B0-955-427-B
X
Miscellaneous
Engine
4.0L V6:
CVGA
Miscellaneous
2009-2010
Oil drain plug Torque
Wheel Mounting Nuts Torque
Engine Code
3.8L
CGUA
4.0L
CVGA
3.8L
CGUA
4.0L
CVGA
Torque Spec
27 Nm
135 Nm
Revised 11/11/2019
© 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information
available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its
affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
CHAngE OIL
Your vehicle is equipped with an engine oil change
indicator system. The CHAngE OIL message will flash in
the instrument cluster odometer for approximately
12 seconds after a single chime has sounded to indicate
the next scheduled oil change interval. The engine oil
change indicator system is duty cycle-based, which
means the engine oil change interval may fluctuate
dependent upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the Trip / Odometer Display reset button on the
instrument cluster.
To reset the oil change indicator system
(after performing the scheduled maintenance)
Refer to the following procedure.
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal slowly three times
within 10 seconds.
3. Turn the ignition switch to the OFF position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.
© 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information
available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its
affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.