TT 15-19-04

Technical Tip
15-19-04TT - Check Engine Light is ON After Camshaft Adjuster Repair or
Long Block Replacement, DTC P0017 Stored
Transaction No:
2057852/1
Release date:
11/22/2019
Condition
ATTENTION:
THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN.
TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING.
Applicable Vehicles
Model(s)
Year
Eng. Code
Trans. Code
VIN Range From
VIN Range To
Jetta
2017- 2019
1.4L
(DGXA, DJXA)
All
All
All
Revision Table
Instance Number
Published Date
Version Number
2057852/1
11/22/19
15-19-04TT
Reason For Update
Original publication.
Technical Background
Failure to reinstall oil sleeves when servicing cam shafts and adjusters.
Service
When removing the camshaft adjusters, note that both adjusters have an inner oil sleeve (figure 1). The sleeves must
be reinstalled on both adjusters, whenever installing the adjusters on the camshafts (figure 2). Failure to install both
sleeves will result in DTC P0017 to setting.
DTC
P0017
Figure 1
Description
Crankshaft Position-Camshaft Position Correlation Bank
1 Sensor B
Figure 2
1
Technical Tip
15-19-04TT - Check Engine Light is ON After Camshaft Adjuster Repair or
Long Block Replacement, DTC P0017 Stored
Transaction No:
2057852/1
Release date:
11/22/2019
Additional Information
© 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on
the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make
changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
2