07-146-19R

ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2019 Subaru of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE BULLETIN
APPLICABILITY:
SUBJECT:
2015-2019MY WRX		
NUMBER: 07-146-19R
Engine Wiring Harness- Design Change
DATE: 01/24/19
REVISED: 11/06/19
INTRODUCTION:
This bulletin announces a design change made to the engine wiring harness to improve resistance to
moisture. A detailed illustration describing the change is supplied below.
PRODUCTION CHANGE INFORMATION:
The new harness was incorporated into production starting with VIN K8806179.
PART INFORMATION:
Description
HARNESS-ENGINE
Part Number
Application
24020AF983
2015-17MY
24020AG431
2017-19MY
NOTE: This part change was made during 2017MY production therefore, always order the most upto-date part number based on the specific VIN of the vehicle being repaired.
Continued...
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 07-146-19R; Revised: 11/06/19
Page 1 of 2
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for replacing the engine wiring harness remain unchanged. Always refer to
the applicable Service Manual and review the full requirements of the repair being performed. The
Service Manual procedures contain information critical to performing an effective repair the first
time, every time. This information includes but is not limited to: important SAFETY precautions,
proper inspection criteria, necessary special tools, required processes and related one-time-use parts
needed for a complete and lasting repair.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Classic or Gold plan, this repair may be submitted using the following claim
information:
Labor Description
Labor Operation #
Labor Time
ENGINE WIRING HARNESS DIAGNOSIS & REPAIR
B880-159
ST
ENGINE WIRING HARNESS R&R
C880-151
2.1
Fail Code
VKA-48
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 07-146-19R; Revised: 11/06/19
Page 2 of 2