02-184-19

ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2019 Subaru of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE INFORMATION BULLETIN
APPLICABILITY:
		
SUBJECT:
NUMBER: 02-184-19
2019-20MY Ascent
2020MY Legacy and Outback Models with 2.4L DIT
DATE: 12/03/19
Intake Duct Bolt Tightening / Torque Sequence
INTRODUCTION:
This Service Information Bulletin provides the proper tightening / torque sequence to follow when
installing Intake Duct #3 onto the intercooler assembly. Following the sequence below will insure
the bolts remain fully tightened.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
3
IMPORTANT: Always install a new gasket (p.n.
21896AA150).
Torque the 3 bolts to 16.1Nm (11.8 ft. lbs.) following
the sequence shown in the illustration.
1
2
NOTE: The applicable Service Manuals will be
updated with this information shortly.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Bulletin Number: 02-184-19; Date: 12/03/19
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Page 1 of 1