2038562/1

Technical product information
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
New Continental GT Convertible – Front seat belt webbing twisted
Worldwide Bentley (1WBE)
Bentley
2038562/1
EH
Approval
New customer code
Object of complaint
Complaint type
Position
Occupant protection, pedestrian protection -> Belts -> Three-point belt component / consumables -> twisted
New workshop code
Object of complaint
Occupant protection, pedestrian protection -> Belts -> Three-point belt -> Push-in clip f.
three-point seat belt
Occupant protection, pedestrian protection -> Belts -> Three-point belt -> Push-in clip f.
three-point seat belt
Vehicle data
New Continental GT Convertible
Sales types
Type
3941*
3941*
3941*
3941*
3942*
3942*
3942*
3942*
MY
2012
2013
2014
2015
2012
2013
2014
2015
Brand Designation Engine code Gearbox code
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
E
*
*
Final drive code
*
*
*
*
*
*
*
*
Chassis numbers
Manufacturer Filler Type Filler MY Factory From To
Prod from Prod to
SCB
***
**
*
*
C
074021 999999
Documents
Document name
master.xml
master.doc
Complaint type
component / consumables ->
incorrectly built
component / consumables ->
incorrectly built
Position
left
right
Technical product information
New Continental GT Convertible – Front seat belt webbing twisted
Transaction No.: 2038562/1
Customer statement / workshop findings
Front seat belt webbing twisted
Figure 1
The front seat belt webbing is twisted this is evident in both the stowed position and also when the seat belt is worn see Figure 1
Figure 2
The front seat belt in the stowed position should be as shown in figure 2
Technical background
The plastic seat belt webbing guide, a plastic moulding incorporated in the seat belt upper ‘D’ loop assembly, may not have been fully clipped onto the
metal ‘D’ loop. When this is the case a twist in the seat belt webbing is possible
Production change
Assembly method revised
Measure
In the event of a twist being identified in a front seat belt then carry out the following check on that specific seat belt
1. Remove the rear quarter waistrail reference workshop manual Rear quarter waistrail – To remove and fit Rep Gr.70
Figure 3
Figure 4
2. Referencing figure 3 and 4 inspect the seat belt webbing plastic guide (A). Ensure the three clipping points (C) are securely clipped to the ‘D’
ring (B).
3. If the guide is not securely clipped then remove and discard the guide and fit a new replacement guide.
4. On completion the guide must be correctly secured to the ‘D’ ring paying close attention to both outer clipping features (C)
Warranty accounting instructions
Please Note: Normal warranty policies are applicable
Warranty Type
Labour Operation Code
110
69 26 19 99 (for RO open date on or before 13 November 2014)
69 26 19 02 (for RO open after 13 November 2014)
Damage Service Number
69 26
Damage Code
00 18
Location Code
001 left, 002 right
Time
140 TU
Parts information
Part number
Description
Quantity
3W7857827
Belt guide left hand
1
3W7857828
Belt guide right hand
1