15-255-19R

ATTENTION:
GENERAL MANAGER

PARTS MANAGER

CLAIMS PERSONNEL

IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER

© 2019 Subaru of America, Inc. All rights reserved.
SERVICE INFORMATION BULLETIN
APPLICABILITY:
SUBJECT:
2019MY Legacy and Outback w/ 8-in. Navi System
NUMBER: 15-255-19R
2019-20MY Impreza and Crosstrek w/ 8-in. Navi System DATE: 11-08-19
2019-20MY Crosstrek Hybrid w/ 8-in. Navi System
REVISED: 01-28-20
2019-20MY Forester w/ 8-in. Navi System
2019-20MY WRX WRX STI w/ 7-in. Navi System
2019-20MY Ascent w/ 8-in. Navi System
2019-20MY BRZ with 7-in. Navi System
Map Data Update Procedure for Harman Gen 3.1
Navigation Equipped Head Units (H/U)
INTRODUCTION:
On December 14th, 2018, the first TomTom map update for Gen 3.1 Harman navigation equipped
vehicles was made available. While the map update process is user-friendly, we ask that retailers
assist customers with the map update procedure when requested as a courtesy, an opportunity to
build retailer loyalty, enhance customer satisfaction and in keeping with the Love Promise. Retailers
may also want to install this map update on any certified pre-owned or pre-owned vehicles in their
inventory on their own. The site (dealer.subaru-maps.com) which is unique for retailers, is not the
same as what customers will be accessing at home. If Service, Sales, and/or Parts Managers do not
have a login, create an account from this page. There may be a short delay while retailer approval is
pending.
Materials Required:
1. A PC or MAC computer / laptop
2. A valid e-mail address
3. USB 2.0 or 3.0 drive, at least 16GB in size (recommended device brands: SanDisk®, Kingston®,
Transcend® or Verbatim®)
4. TSB 15-236-18R for reference.
SERVICE PROCEDURE / INFORMATION:
CAUTION: NEVER attempt to install this software update on any 2017 or 2018 MY vehicles as they
are equipped with Gen 3.0 Navigation systems. This update is ONLY for models equipped with Gen
3.1 Navigation systems. Should an attempt be made to install any of these files into a Gen 3.0 H/U, the
USB Authentication error screen below will be displayed.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how
to do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-255-19R; Revised: 01-28-20
Page 1 of 3
•
•
•
•
•
The USB Authentication error screen will also be displayed when attempting to install the
map data bundled with a software version older than the version already installed in the H/U.
Move the vehicle to an outside location where the engine can be safely started and kept idling
during the update process.
Never idle the vehicle in a closed space such as a garage, even if the garage door is open.
Once the vehicle is in a safe location, be sure the vehicle is in Park if CVT or Neutral if MT
and the parking brake is fully engaged.
Unplug any cables or available devices from the USB ports.
NOTE: The update process involves downloading and installing the software update so, time
duration will depend on communication and available data transfer rate. During the update
installation, H/U functionality will be restricted.
These updates are applicable to the following vehicles and Navigation equipped H/U part numbers:
•
•
•
•
•
•
•
Legacy / Outback: 86471AL67A and AL68A
Impreza / Crosstrek: 86271FL65A
Crosstrek Hybrid: 86271FL690
Forester: 86271SJ600 and SJ610
WRX: 86471VA610
Ascent: 86271XC60A and 61A
BRZ: 86271CA680
The POST-UPDATE software version ID is Rel_UA.19.42.70 for all applicable models.
Step 1: Prepare the USB with the Map Data:``
a) Go to dealer.subaru-maps.com.
b) Create an account. A valid email address is required to complete this process.
c) Download and install the Map Downloader application for Mac or PC using the link provided on
subaru-maps.com.
d) Open the app and login with the newly-created account information.
e) Press the “+” button on the bottom right to add a vehicle using the customer’s VIN.
f) Click the UPDATES tab to check for any available updates. If an update is available, click
START to begin the download. NOTE: These updates might take some time to complete as the
map files are large and data transfer rates vary.
Continued...
Bulletin Number: 15-255-19R; Revised: 01-28-20
Page 2 of 3
g) When the download is complete, plug the USB drive into the PC. Click “START
INSTALLATION”. NOTE: All existing data on the USB will be deleted.
h) Once complete, properly EJECT / REMOVE the USB device from the PC and proceed to the
vehicle.
Step 2. H/U Map Update:
a) Follow the Service Procedure provided in TSB 15-236-18R: Step 1 and Steps 5-9 as applicable
to update the H/U.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Continued...
Bulletin Number: 15-255-19R; Revised: 01-28-20
Page 3 of 3