ITB17-027c

Service Bulletin Details

Public Details for: ITB17-027c

2016-2020 qx80; outside mirror(s) loose at base this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.


- 2020 - 2019 - 2018 - 2017 - 2016 -

Models from 2020
2020 INFINITI QX80
Models from 2019
2019 INFINITI QX80
Models from 2018
2018 INFINITI QX80
Models from 2017
2017 INFINITI QX80
Models from 2016
2016 INFINITI QX80
Classification:
Reference:
Date:
BT17-008c
ITB17-027c
January 24, 2020
2016-2020 QX80; OUTSIDE MIRROR(S) LOOSE AT BASE
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
2016-2020 QX80 (Z62)
SERVICE INFORMATION
If the power foldable outside mirrors are manually folded/unfolded or bumped, the mirror body can become
loose at the pivot point.
If this occurs, the mirrors should be adjusted again electrically before driving.
To readjust the mirrors, press the “CLOSE” switch (see Figure 1) until the mirrors are fully folded in, and then
press the “OPEN” switch until the mirrors are fully open.
This mirror readjustment procedure is included in section 3 - Pre-driving checks and adjustments of the
vehicle Owner’s Manual.
NOTE:


DO NOT replace the power foldable outside mirrors for this condition, should it occur.
This condition is not covered under the Infiniti New Vehicle Limited Warranty.
“CLOSE”
switch
“OPEN”
switch
Figure 1
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/2
AMENDMENT HISTORY
Published DATE
REFERENCE
DESCRIPTION
March 21, 2017
ITB17-027
Original bulletin published
July 11, 2018
ITB17-027a
APPLIED VEHICLES revised
December 11, 2018
ITB17-027b
APPLIED VEHICLES revised
January 24, 2020
ITB17-027c
APPLIED VEHICLES revised
2/2
ITB17-027c


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.