122-L4G4G-03

Service Bulletin Details

Public Details for: 122-L4G4G-03

Instructions for retrofitting the sport design package on the new cayenne e3.


- 2020 - 2019 - 2018 -

Installation and Conversion Instructions
Cayenne (9YA)
22/19
ENU
6699
6
SportDesign Package (Step 3)
Information:
Retrofitting
Roof spoiler for Cayenne Coupé not available
Model Year:
As of 2018
Note:
The SportDesign package includes a front apron, door trim panels/wheel arch trims, door entry guards
and rear apron.
Figure 1
Tequipment
Feb 27, 2020
Page 1 of 14
6
Cayenne (9YA)
6699
ENU
Installation and Conversion Instructions
22/19
A painted roof spoiler can be ordered as an optional extra. Roof spoiler for Cayenne Coupé not available.
The relevant legal regulations must be observed in the various countries.
Parts list:
Information
The scope of parts can vary in the different complete packages and can therefore differ from the lists of
parts shown here. Dispose of parts that are not needed.
Part No.
RoW vehicles - Cayenne/S
9Y0.044.850.C
1x
9Y0.044.860.C
1x
Part No.
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
RoW vehicles - Cayenne Turbo
9Y0.044.850.D
1x
9Y0.044.860.D
1x
Part No.
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
USA vehicles - Cayenne/S
9Y0.044.861.C
1x
9Y0.044.862.C
1x
Part No.
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
USA vehicles - Cayenne Turbo
9Y0.044.861.D
1x
9Y0.044.862.D
1x
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
The following sets for Cayenne Coupé
Part No.
RoW vehicles - Cayenne/S Coupé
9Y0.044.850.G
1x
9Y0.044.860.G
1x
Part No.
Feb 27, 2020
Page 2 of 14
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
RoW vehicles - Cayenne Turbo Coupé
9Y0.044.850.H
1x
9Y0.044.860.H
1x
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
Tequipment
Installation and Conversion Instructions
Part No.
Cayenne (9YA)
22/19
ENU
6699
6
USA vehicles - Cayenne/S Coupé
9Y0.044.861.G
1x
9Y0.044.862.G
1x
Part No.
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
USA vehicles - Cayenne Turbo Coupé
9Y0.044.861.H
1x
9Y0.044.862.H
1x
SportDesign package complete set with front and rear
ParkAssist and trailer hitch
SportDesign package with front ParkAssist
A painted roof spoiler  Figure 1 -1- can be ordered as an optional extra. Roof spoiler for
Cayenne Coupé not available
Roof spoiler
958.044.801.23
Optional
1x
Roof spoiler, prime-coated
Important: The following parts must also be ordered, depending on country and vehicle variant.
Night vision system
holder
9Y0.980.562
Vehicle version
1x
With Night vision system
Vehicle version and country version
Rear panel, Carbon
9Y0.807.834.F
1x
Rear panel, Carbon, closed
9Y0.807.834.G
1x
Rear panel, Carbon, trailer hitch, RoW
9Y0.807.834.H
1x
Rear panel, Carbon, trailer hitch, USA
Vehicle version
Supplementary set
9Y0.044.858.B
1x
With ACC  Figure 2 -4-
9Y0.044.858.A
1x
Without ACC  Figure 2 -4-
Number plate holder 
Figure 2 -171x
9Y0.807.287.K
Country version
Number plate holder, ECE
9Y0.807.287.L
1x
Number plate holder, NAR
9Y0.807.287.M
1x
Number plate holder, China
9Y0.807.287.N
1x
Number plate holder, Japan
9Y0.807.287.P
1x
Number plate holder, RoW
9Y0.807.287.S
1x
Number plate holder, China - PHEV
Tequipment
Feb 27, 2020
Page 3 of 14
6
Cayenne (9YA)
6699
ENU
Installation and Conversion Instructions
22/19
Scope of air guides  Figure 6 -1 and 29Y0.117.335.D
1x
9Y0.117.336.D
1x
9Y0.117.335.E
1x
9Y0.117.336.E
1x
9Y0.117.335.F
1x
9Y0.117.336.F
1x
Front left air guide for charge-air
cooler
Front right air guide for
charge-air cooler
Front left air guide for charge-air
cooler
Front right air guide for
charge-air cooler
Front left air guide for charge-air
cooler
Front right air guide for
charge-air cooler
Scope of sound absorber for bumper  Figure 6 -3-
Engine variant
V6 petrol engine LK3 TV8
V8 petrol engine T1M
R4 petrol engine TW6, V6 petrol
engine LK2 T9I
Country version
9Y0.807.550.B
1x
Sound absorber on bumper
For RoW
9Y0.807.550.E
1x
Sound absorber on bumper
For NAR
9Y0.807.550.K
1x
Sound absorber on bumper
For Korea
Important: The following parts are included in the package and do not have to be ordered. The
following parts lists are provided for overview purposes only! Part numbers can vary
depending on country and package.
Feb 27, 2020
Page 4 of 14
Tequipment
Installation and Conversion Instructions
Cayenne (9YA)
22/19
ENU
6699
6
Figure 2
Scope of front apron
9Y0.807.665.D
1x
Foam part, SDP  Figure 2 -1-
9Y0.807.161.F/162.F
2x
Side air guides, left and right, TOP  Figure 2 -2-
9Y0.807.161.G/162.G
2x
Side air guides, left and right, TOP Nivi  Figure 2 -2-
9Y0.807.681.D/682.D
2x
Side grille, left and right, SDP, TOP  Figure 2 -3-
9Y0.807.049.B/050.B
2x
Side guide section, left and right  Figure 2 -5-
9Y0.807.683.M
1x
center grille, SDP  Figure 2 -4-
9Y0.807.683.N
1x
center grille, SDP, ACC  Figure 2 -4-
9Y0.807.177.B/178.B
2x
Side guides, left and right  Figure 2 -6-
9Y0.807.957.B/958.B
2x
Side cooling-air guide, left and right  Figure 2 -7-
9Y0.807.571.B/572.B
2x
Bottom guide element, left and right  Figure 2 -8-
9Y0.807.795.A/796.A
2x
Front cover, left and right, SDP, TOP  Figure 2 -9-
9Y0.807.795.D/796.D
2x
Cover, SDP, Carbon  Figure 2 -12-
9Y0.807.605.A/606.A
2x
9Y0.807.675.B/676.B
2x
9Y0.807.677.A/678.A
2x
Air guide, SDP, Carbon, left and right (picture differs from actual
part)  Figure 2 -13Airblade trim, SDP, bottom, Carbon (picture differs from actual
part)  Figure 2 -13Position light holder, USA, SDP, basic and TOP  Figure 2 -10-
Tequipment
Feb 27, 2020
Page 5 of 14
6
Cayenne (9YA)
6699
ENU
Installation and Conversion Instructions
22/19
9Y0.807.221.B
1x
Front apron, ready-primed  Figure 2 -11-
9Y0.807.684
1x
center grille, bottom  Figure 2 -15-
9Y0.807.061.D
1x
Front spoiler for bumper  Figure 2 -16-
9Y0.807.644.A
1x
RTV cover, TOP/basic  Figure 2 -18-
9Y0.807.997.B
1x
RTV holder, SDP  Figure 2 -19-
9Y0.807.129.B/130.B
2x
PDC holder, left and right, outer  Figure 2 -20-
9Y0.807.115.B/116.B
2x
STF PLA holder, outer  Figure 2 -21-
9Y0.807.295.B/296.B
2x
Adhesive tape for PLA, SDP  Figure 2 -22-
9Y0.807.155.B/156.B
2x
Towing lug cover, left and right, ready-primed  Figure 2 -23
and 24-
Figure 3
Scope of wheel arch trims/door trim panels
Feb 27, 2020
Page 6 of 14
9Y0 853 717 L G2X
1x
Wheel cover, front left
9Y0 853 718 L G2X
1x
Wheel cover, front right
9Y0 853 731 K G2X
1x
Wheel cover, rear left
9Y0 853 732 K G2X
1x
Wheel cover, rear right
Tequipment
Installation and Conversion Instructions
9Y0 837 341 AY G2X
1x
Set of door trim panels, left
9Y0 837 342 AY G2X
1x
Set of door trim panels, right
Cayenne (9YA)
22/19
ENU
6699
6
Figure 4
Scope of door entry guards
9Y0.802.845.A
9Y0.802.846.A
9Y0.853.751.C
9Y0.853.752.C
9Y0.854.871.A
9Y0.854.872.A
2x
Support, left and right (not included in set)
2x
Door entry guard, left and right
2x
Wheel spoiler, rear left and right (not included in set)
Tequipment
Feb 27, 2020
Page 7 of 14
6
Cayenne (9YA)
6699
ENU
Installation and Conversion Instructions
22/19
Figure 5
Scope of rear apron
Feb 27, 2020
Page 8 of 14
9Y0.807.378.A
1x
Guides for rear apron, left  Figure 5 -1-
9Y0.807.377.A
1x
Guide for rear apron, right  Figure 5 -1-
9Y0.807.110.B
1x
9Y0.807.421
1x
Spoiler for rear apron/rear skirt, SDP, Carbon  Figure 5
-2Rear apron, carry-over part  Figure 5 -3-
9Y0.807.837
1x
Exhaust system cover, left, carry-over part  Figure 5 -4-
9Y0.807.838
1x
Exhaust system cover, right, carry-over part  Figure 5 -4-
9Y0.807.983
1x
Rear cover, bottom, RoW, carry-over part  Figure 5 -5-
9Y0.807.984.B
1x
Rear cover, bottom right, USA, carry-over part  Figure 5 -5-
9Y0.807.983.B
1x
Rear cover, bottom left, USA, carry-over part  Figure 5 -5-
9Y0.807.834.F
1x
Rear panel, closed, Carbon  Figure 5 -6-
RoW: 9Y0.807.834.G
1x
Rear panel, trailer hitch, RoW and USA, open, Carbon 
Figure 5 -6-
USA: 9Y0.807.834.H
9Y0.807.697
1x
Grille on cover, RoW, carry-over part  Figure 5 -7-
9Y0.807.925
1x
Grille on cover, USA, left, carry-over part  Figure 5 -8-
9Y0.807.926
1x
Grille on cover, USA, right, carry-over part  Figure 5 -8-
Tequipment
Installation and Conversion Instructions
Cayenne (9YA)
22/19
ENU
6699
9Y0.807.499.B/500.B
2x
Towing lug cover, carry-over part  Figure 5 -9-
9Y0.807.139/140
2x
PLA holder, carry-over part  Figure 5 -10-
9Y0.807.595.A/596.A
2x
PDC holder, pre-installed on rear apron  Figure 5 -11-
9Y0.807.591.A/592.A
2x
PDC holder, pre-installed on rear apron  Figure 5 -11-
6
Figure 6
Scope of air guides  Figure 6 -1 and 29Y0.117.335.D
1x
9Y0.117.336.D
1x
9Y0.117.335.E
1x
9Y0.117.336.E
1x
9Y0.117.335.F
1x
9Y0.117.336.F
1x
Front left air guide for charge-air
cooler
Front right air guide for
charge-air cooler
Front left air guide for charge-air
cooler
Front right air guide for
charge-air cooler
Front left air guide for charge-air
cooler
Front right air guide for
charge-air cooler
Tequipment
Engine variant
V6 petrol engine LK3 TV8
V8 petrol engine T1M
R4 petrol engine TW6, V6 petrol
engine LK2 T9I
Feb 27, 2020
Page 9 of 14
6
Cayenne (9YA)
6699
ENU
Installation and Conversion Instructions
22/19
Scope of sound absorber for bumper  Figure 6 -39Y0.807.550.B
1x
Sound absorber on bumper
For RoW
9Y0.807.550.E
1x
Sound absorber on bumper
For NAR
9Y0.807.550.K
1x
Sound absorber on bumper
For Korea
Equipment variant
Scope of center air guides
Work
Procedure:
Country version
9Y0.121.710.B
1x
center air guide  Figure 6 -5- Without ACC
9Y0.121.710.E
1x
center air guide  Figure 6 -5- With ACC
9Y0.807.683.M
1x
9Y0.807.683.N
1x
center grille, SDP  Figure 2
-4center grille, SDP, ACC 
Figure 2 -4-
Without ACC
With ACC
Information
Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be
performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the
steps shown.
Information
The number of electric plug connections and clips will vary depending on equipment.
CAUTION
Painting components
•
Risk of warping of components
•
Risk of damage to components

Observe the guidelines and instructions for painting components in the "Paint" Workshop Manual.

Always place parts without tension on the painting devices provided during painting and drying processes.
NOTICE
Voltage drop
•
Risk of irreparable damage to control unit
•
Risk of damage to control unit
•
Fault entries in the control unit
•
Coding in the control unit is aborted
Feb 27, 2020
Page 10 of 14
Tequipment
Installation and Conversion Instructions
Cayenne (9YA)
22/19
ENU
6699
6
•
Malfunctions in control unit, even during programming

Before disconnecting the control unit, switch off ignition and remove ignition key.

Make sure that the power supply is not interrupted during programming.

Connect battery charger/power supply - Suitable for AGM Type batteries, recommended current rating of
90A fixed voltage 13.5V to 14.5V.
1
Raise the vehicle.  Workshop Manual 'Lifting the vehicle'
2
Connect battery charger.  Workshop Manual 'Charging vehicle electrical system battery'
3
Paint work/Installing front apron
Paint all ready-primed parts to match the vehicle’s color code in accordance with instructions in the
Paint Workshop Manual. Paint the following parts in vehicle color:
Front apron, front spoiler on bumper, outer STF PLA holder (if Porsche Steering Assist
(PLA) is installed)
3.1
4
Disassemble and assemble front apron  Figure 2 .
3.1.1
Replace side guides  Figure 2 -6-. Carry out this step in conjunction with Step
3.1.2.
3.1.2
Replace front apron  Workshop Manual 'Replacing front apron (basic)'. After
removing the standard front apron, replace air guides for radiator and charge-air
cooler (see 3.1.2 and 3.1.3).
3.1.3
Replace air guide for radiator with the supplied radiator guides  Workshop
Manual 'Removing and installing front air guide'. Also replace sound absorber on
bumper with the supplied new sound absorber  Figure 6 -3- and side air guides
 Figure 6 -2-.
3.1.4
Replace air guides for charge-air cooler with the supplied air guides  Workshop
Manual 'Removing and installing front air guide at the side (ahead of charge-air
cooler)'.
Paint work/Installing wheel covers
Paint all ready-primed parts to match the vehicle’s color code in accordance with instructions in the
Paint Workshop Manual. Paint the following parts in vehicle color:
Wheel covers, door trim panels
4.1
Remove and install door trim panels and wheel arch trims  Figure 3 .
4.1.1
Replace door trim panels at the front  Workshop Manual 'Removing and installing
trim for front door' and rear  Workshop Manual 'Removing and installing trim for
rear door'.
Tequipment
Feb 27, 2020
Page 11 of 14
6
Cayenne (9YA)
6699
ENU
4.1.2
5
Replace wheel covers at the front  Workshop Manual 'Removing and installing
front wheel cover' and rear  Workshop Manual 'Removing and installing rear
wheel cover'.
Installing door entry guards
5.1
Remove and install door entry guards  Figure 4 -2-.
5.1.1
6
Installation and Conversion Instructions
22/19
Replace door entry guards  Workshop Manual 'Removing and installing door
entry guard'.
Paint work/Installing rear apron
Paint all ready-primed parts to match the vehicle’s color code in accordance with instructions in the
Paint Workshop Manual. Paint the following parts in vehicle color:
PDC spoiler/rear skirt
6.1
7
Remove and install PDC spoiler/rear skirt  Figure 5 -1-.
6.1.1
Remove and install rear apron  Workshop Manual 'Removing and installing rear
apron'.
6.1.2
Remove and install PDC spoiler/rear skirt  Workshop Manual 'Removing and
installing rear skirt'.
6.1.3
Remove and install rear panel  Workshop Manual 'Removing and installing rear
panel'.
6.1.4
For vehicles with Lane Change Assist (I-no. 7Y1, 7Y2, 7Y3, 7Y4), continue with
Step 6.1.4.
6.1.5
Calibrate Lane Change Assist  Workshop Manual 'Calibrating Lane Change
Assist'.
Paint work/roof spoiler assembly. Roof spoiler for Cayenne Coupé not available
Paint all ready-primed parts to match the vehicle’s color code in accordance with instructions in the
Paint Workshop Manual. Paint the following parts in vehicle color:
Roof spoiler, roof spoiler brackets at the left and right
7.1
8
Feb 27, 2020
Page 12 of 14
Disassemble and assemble roof spoiler.
7.1.1
Remove and install roof spoiler  Workshop Manual 'Removing and installing rear
spoiler'.
7.1.2
Disassemble and assemble roof spoiler  Workshop Manual 'Replacing rear
spoiler'. Install double-sided adhesive strips at the required positions. Tightening
torque for screws securing fender mounting to roof section (8x): 7.5 Nm
(5.5 ftlb.).
Code SportDesign package.
Tequipment
Installation and Conversion Instructions
Cayenne (9YA)
22/19
ENU
8.1
9900 - PIWIS Tester 3 must be connected and ignition switched on.
8.2
Select "Diagnostics". 9900 - PIWIS Tester 3 detects the model line.
Press Next. PIWIS Tester III Diagnostics starts.
8.3
Update vehicle data.
6699
6
8.3.1
Additional menu must be selected by pressing •F7“. Press •F11“ to confirm
the question “Create vehicle analysis log (VAL)?”.
8.3.2
Select the Maintenance of vehicle data function. Press •F12“ until PR
numbers appears in the Value group column.
8.3.3
Select Trim CD value in the Family column. When you touch the cell behind Trim
CD value, the drop-down menu opens.
Select the value 2D1, 2D9, 2D5 - SportDesign package.
Press •F12“ to change values.
8.3.4
The selected values appear. Press •F8“ to write values. Wait until the following
message appears: Generation of vehicle data is complete. Press ......
Press •F11“ to switch to the control unit overview.
8.4
Adapt coding.
8.4.1
Select all control units by pressing •Ctrl A“. Press •F12“ to continue.
8.4.2
Switch to the Coding/programming menu. Press •F12“ to continue.
Select Automatic coding mode. Press •F12“ to continue.
8.4.3
Wait until the following message appears: Coding was completed successfully.
Press •F12“ to continue.
Press •F12“ to return to the Overview menu.
123456:
8.5
Switch off ignition and disconnect 9900 - PIWIS Tester 3.
8.6
Disconnect battery charger.
Installing SportDesign package, complete
Includes:
Replacing front apron, replacing rear apron.
Replacing door entry guards, replacing door trim panels,
replacing wheel arch trims.
Replacing air guides, replacing sound absorber on bumper.
Without:
Calibrating Lane Change Assist.
Tequipment
Labor time: 742 TU
Feb 27, 2020
Page 13 of 14
6
Cayenne (9YA)
6699
ENU
22/19
Installation and Conversion Instructions
66585500:
Replacing roof spoiler
Includes:
Removing and installing roof spoiler, disassembling and
assembling roof spoiler
Labor time: 76 TU
66586161:
Painting new roof spoiler
Includes:
Roof spoiler and brackets
Preparing body for painting
Labor time: 70 TU
12345:
Painting new parts in SportDesign package, complete
Includes:
Painting new parts, Step 1:
Front apron, towing lug cover, front spoiler on bumper, PLA
holder, rear apron, towing lug, PDC spoiler, PLA holder, wheel
covers, wheel covers at doors, wheel arch trims, door trim
panels
Preparing body for painting
Labor time: 560 TU
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2020 Porsche Cars North America, Inc.
Feb 27, 2020
Page 14 of 14
Tequipment


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.