A0120452048604_3

Service Bulletin Details

Public Details for: A0120452048604_3

This bulletin contains a software update for a mil on with dtc P008700.


- 2018 - 2017 -

01 MIL on, DTC P008700 or P12A300 stored in the ECM - 3.0T
01 20 45 2048604/3 March 3, 2020. Supersedes Technical Service Bulletin Group 01 number 18-60 dated March
9, 2018 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
S4, S5, and
SQ5
2017 - 2018
All
3.0T
Condition
REVISION HISTORY
Revision
Date
Purpose
3
-
Revised Service (Updated SVM)
2
03/08/2018
Revised title (Added clarification)
Revised header (Added DTC)
Revised Condition (Added DTC)
1
08/14/2017
Initial publication
Customer states:
 MIL on.
Workshop findings:
One or more of the following DTCs are stored in the engine control module (ECM), J623 (address word 0001):
 DTC P008700 (Fuel Rail/System Pressure – Too Low).
 DTC P12A300 (Fuel Pressure Regulator Valve mechanical malfunction).
Technical Background
Not applicable.
Production Solution
Optimized software with improved diagnostics.
Page 1 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Service
Do not replace the ECM for this fault. Do not contact Technical Assistance Center (TAC) unless the problem
persists after the software update or if there is a problem with the SVM process.
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the engine control module (ECM), J623 (address word 0001) and transmission control module (TCM),
J217 (address word 0002) using the SVM action code as listed in the table below if necessary:
Model
Engine and/or
Transmission
S4/S5
(all)
SQ5
Old Software
Part Number
Old
Software
Version
New Software
Part Number
New Software
Version
SVM Action
Code
(or higher)
CWGD
8W0907559H
≤ 0007
8W0907559H
0007
0D5
8W0927158C
≤ 1006
8W0927158C
1006
CWGD
80A907559C
≤ 0007
80A907559C
0007
0D5
80A927158A
≤ 1005
80A927158A
1005
01A234
01A234
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 1E1 up to 8 Years/80,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Connect battery charger and perform software
update with SVM
2470 2599
50 TU
Diagnostic Time:
GFF
0150 0000
Time stated on
the diagnostic
protocol (Max 20
TU)
Road test prior to service procedure
No allowance
0 TU
Page 2 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Road test after service procedure
Claim Comment:
No allowance
0 TU
As per TSB #2048604/3
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
 TSB 2011732, 00 Software Version Management (SVM), operating instructions.
All parts and service references provided in this TSB (2048604) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 3 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.