T-TT-0528-19_Rev

Service Bulletin Details

Public Details for: T-TT-0528-19_Rev

Tt: some 2014-2020 model year highlander and highlander hv vehicles are equipped with alloy wheels that are clad with a plastic cover. Use of a heat gun to facilitate removal of stick-on wheel weights may damage the coating on the cladding


- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -

Tech Tip T-TT-0528-19
Subject
February 25, 2020
Market
Clad Wheel Finish Peeling Off/Bubbling
Service Category
Section
Suspension
Tire/Wheel
USA
Applicability
2014-2020 Highlander/HV
APPLICABLE VEHICLES
2014-2020
Highlander
2014-2020
Highlander HV
CONDITION
Some 2014-2020 model year Highlander and Highlander HV vehicles are equipped with alloy wheels
that are clad with a plastic cover. Use of a heat gun to facilitate removal of stick-on wheel weights
may damage the coating on the cladding and cause it bubble and/or peel off (see picture below).
Table below contains a list of the applicable wheel part numbers with the clad design.
Model
Highlander/Highlander HV
Model Year
14-19MY
16-19MY
20MY
Part Number
4260D-0E010
4260D-0E020
4260D-0E030
NOTE: Wheel blemishes caused by application of heat to remove wheel weights are non-warrantable
RECOMMENDATIONS
Do not utilize any heat tool to remove stick-on wheel weights with part numbers listed in the table
above.
LINK REFERENCES
This Tech Tip does not contain any link references
Expires on
Ver. 3.0 01/01/2019 T
02/25/2021
Rev1
© 2019, Toyota Motor Sales, USA
Page 1 of 1


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.