A0120512057831_2
Service Bulletin Details
Public Details for: A0120512057831_2
This bulletin contains repair instructions for dtc P201500 which may or may not have a mil on.
Models from 2020
2020 AUDI A4 |
2020 AUDI A5 |
2020 AUDI A5 CABRIOLET |
Models from 2019
2019 AUDI A4 |
2019 AUDI A5 |
2019 AUDI A5 CABRIOLET |
Models from 2018
2018 AUDI A4 |
2018 AUDI A5 |
2018 AUDI A5 CABRIOLET |
01 MIL on or found during diagnostic work, DTC P201500 stored in the ECM 01 20 51 2057831/2 March 25, 2020. Supersedes Technical Service Bulletin Group 01 number 19-34 dated December 3, 2019 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4 allroad 2018 - 2019 All 2.0 liter A4, A5, A5 Cabriolet, and A5 Sportback 2018 - 2020 All 2.0 liter Condition REVISION HISTORY Revision Date Purpose 2 - Revised Warranty (Updating Damage Code) 1 12/03/2019 Initial publication Customer concern: MIL on. Or No customer concerns, it is found during PDI or any other diagnostic work. Workshop findings: The following DTC may be stored in the engine control module (ECM), J623 (address word 0001): DTC P201500 (sender for intake manifold flap position/air flow control, implausible signal, sporadic) with symptom code 2967. Technical Background Due to a sporadic wrong initialization of the airflow control flap DTC P201500 (sporadic) is stored in the ECM. A MIL on customer concern is usually caused by additional DTC’s stored in the ECM. Production Solution New engine software scheduled for Q2 of 2020. Page 1 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Service Scenario 1 DTC P201500 (sporadic) stored in the ECM only: Do not perform the Guided Fault Finding test plan, erase the DTC, and return the vehicle to the customer. Note: Parts replacement does not solve this issue. Claims for replaced parts will be subject to review. Scenario 2 DTC P201500 (sporadic) and there are additional DTC’s stored in the ECM: 1. Erase DTC P201500. 2. Preform Guided Fault Finding for other DTC’s stored in engine control module. Scenario 3 DTC P201500 (static) stored in the ECM: A static entry of this DTC indicates a failure and GFF should be performed in this case. Warranty Claim Type: 110 up to 48 Months/50,000 Mile. G10 for CPO Covered Vehicles – Verify Owner. If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2465 Damage Code: 0040 Diagnostic Time: GFF 0150 0000 Time stated on the diagnostic protocol (Max 20 TU) Road test prior to the service procedure No allowance 0 TU Page 2 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Road test after the service procedure Claim Comment: No allowance 0 TU As per TSB #2057831/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information All parts and service references provided in this TSB (2057831) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2020 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 3 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.