122-A3L9P-04
Service Bulletin Details
Public Details for: 122-A3L9P-04
Instructions for retrofitting stainless steel rear trim on the macan.
- 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2018
2018 PORSCHE MACAN |
Models from 2017
2017 PORSCHE MACAN |
Models from 2016
2016 PORSCHE MACAN |
Models from 2015
2015 PORSCHE MACAN |
Models from 2014
2014 PORSCHE MACAN |
Installation and Conversion Instructions Macan (95B) 21/14 ENU 6356 6 Stainless Steel Rear Trim Concern: Retrofitting Model Year: As of 2014 up to 2018 Restriction: • • Note: Stainless steel rear trim for a customized look. Installation together with the stainless steel skid plate is recommended. Parts Info: 95B.807.837 6M7 Materials: ——— Work Procedure: 1 Not for vehicles with a trailer hitch (I-no. 1D3/1D6) Not together with SportDesign package (I-no. 2D1/2D2/2D5/2D6). Stainless steel rear trim —— Isopropanol (commercially available) Connect a battery charger. Workshop Manual '2X00IN Battery trickle charging' CAUTION Pointed or sharp objects • Risk of nicks, cuts or scrapes Wear personal protective gear. Tequipment Mar 24, 2020 Page 1 of 6 6 Macan (95B) 6356 ENU 2 21/14 Installation and Conversion Instructions Install stainless steel rear trim. 2.1 Remove rear apron. Workshop Manual '635519 Removing and installing rear apron' 2.2 Remove standard rear panel from rear apron. 2.3 2.2.1 Release and remove expansion rivets. 2.2.2 Guide side tabs out of the rear apron. 2.2.3 Release and unclip locking lugs on the standard rear panel and remove rear panel. Pull film off the edges of the stainless steel rear trim Figure 2 -arrow-. Figure 2 2.4 Position standard rear panel Figure 3 -1in the stainless steel rear trim Figure 3 -2( Figure 3 -arrow-) (installation position). Figure 3 CAUTION Machining work (drilling, filing, grinding, etc.) • Mar 24, 2020 Page 2 of 6 Risk of damage to electric wires Tequipment Installation and Conversion Instructions Macan (95B) 21/14 ENU 6356 6 • Risk of damage to components • Risk of damage to painted surfaces Exercise extreme care while working. Use a bit stop while drilling if necessary. Cover and, if necessary, mask surfaces that are at risk (painted surfaces, wood or carbon look parts and so on). 2.5 Make grooves on the standard rear panel. 2.5.1 Mark the width of the bars Figure 4 -a, b- using a suitable pen/marker Figure 4 -arrows-. 2.5.2 Separate standard rear panel and stainless steel rear trim. Figure 4 Tequipment Mar 24, 2020 Page 3 of 6 6 Macan (95B) 6356 ENU 21/14 2.5.3 Installation and Conversion Instructions Cut standard rear panel using a cutter (Stanley knife), for example, Figure 5 -A- at the markings Figure 5 -arrows- and remove material between the cuts Figure 5 -B-. Figure 5 2.6 Position standard rear panel Figure 6 -1in the stainless steel rear trim Figure 6 -2( Figure 6 -arrow-) (installation position). Figure 6 Mar 24, 2020 Page 4 of 6 Tequipment Installation and Conversion Instructions 2.7 Macan (95B) 21/14 ENU 6356 6 Bend the tabs on the two outer retaining pivots over by approx. 90° Figure 7 -arrow b- and by 180° on the rear retaining pivots Figure 7 -arrow a-. Figure 7 2.8 Install standard rear panel with stainless steel trim on the rear apron. 2.8.1 Carefully join the standard rear panel and stainless steel trim with the help of another technician. The tabs Figure 8 -1- must engage securely in the rear apron. 2.8.2 Guide the side tabs Figure 8 -arrow a- into the rear apron. Figure 8 Tequipment Mar 24, 2020 Page 5 of 6 6 Macan (95B) 6356 ENU Installation and Conversion Instructions 21/14 2.8.3 Bend all other tabs (8 ea.) on the retaining pivots over by approx. 45° Figure 9 -arrows a-. 1 2 3 2.8.4 – Rear apron – Standard rear panel – Stainless steel rear trim Install and lock expansion rivet Figure 9 -4- at the left and right. Figure 9 3 2.9 Pull film Figure 10 -arrow- off the stainless steel rear trim and clean the stainless steel rear trim with isopropanol (commercially available). 2.10 Install rear apron. Workshop Manual '635519 Removing and installing rear apron' Disconnect the battery charger. Workshop Manual '2X00IN Battery trickle charging' Figure 10 63562300: Installing stainless steel rear trim Includes: Removing and installing rear apron and standard rear panel Labor time: 173 TU Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2020 Porsche Cars North America, Inc. Mar 24, 2020 Page 6 of 6 Tequipment