JLRTB02023NAS1

Service Bulletin Details

Public Details for: JLRTB02023NAS1

The malfunction indicator lamp (mil) is illuminated on the instrument panel cluster (ipc) with a small loss in performance and reduction in accelerator response.

- 2020 - 2019 - 2018 -

Models from 2020

2020 LAND ROVER DISCOVERY

2020 LAND ROVER DISCOVERY SPORT

2020 LAND ROVER RANGE ROVER EVOQUE

2020 LAND ROVER RANGE ROVER SPORT

Models from 2019

2019 LAND ROVER DISCOVERY

2019 LAND ROVER DISCOVERY SPORT

2019 LAND ROVER RANGE ROVER EVOQUE

2019 LAND ROVER RANGE ROVER SPORT

2019 LAND ROVER RANGE ROVER VELAR

Models from 2018

2018 LAND ROVER DISCOVERY

2018 LAND ROVER DISCOVERY SPORT

2018 LAND ROVER RANGE ROVER EVOQUE

2018 LAND ROVER RANGE ROVER SPORT

2018 LAND ROVER RANGE ROVER VELAR

3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
JLRTB02023NAS1
TECHNICAL BULLETIN
06 MAR 2020
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described aﬀects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a speciﬁc vehicle.
INFORMATION
SECTION:
303-01
SUBJECT/CONCERN:
Malfunction Indicator Lamp (MIL) Illuminated on the Instrument Panel Cluster (IPC)
AFFECTED VEHICLE RANGE:
MODEL:
MODEL
YEAR:
ASSEMBLY
PLANT:
VIN:
APPLICABILITY:
Discovery (LR)
2018-2019
014201096489
Solihull
INGENIUM I4 2.0L
Petrol
Discovery (LR)
2019-2020
400445426260
Nitra (Slovakia)
INGENIUM I4 2.0L
Petrol
Discovery Sport (LC)
2018-2019
690537824661
Halewood
INGENIUM I4 2.0L
Petrol
New Range Rover Evoque
(LZ)
2020
000011022242
Halewood
INGENIUM I4 2.0L
Petrol
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
1/7
3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
MODEL:
MODEL
YEAR:
ASSEMBLY
PLANT:
VIN:
APPLICABILITY:
Range Rover Evoque (LV)
2018-2019
232184354437
Halewood
INGENIUM I4 2.0L
Petrol
Range Rover Sport (LW)
2018-2020
149358872707
Solihull
INGENIUM I4 2.0L
Petrol
Range Rover Velar (LY)
2018-2019
700246799998
Solihull
INGENIUM I4 2.0L
Petrol
Range Rover Velar (LY)
2019
200001231027
Solihull
INGENIUM I4 2.0L
Petrol
E-PACE (X540)
2018-2020
Z00581Z74881
Graz (Austria)
INGENIUM I4 2.0L
Petrol
F-TYPE (X152)
2018-2020
K45252K65706
Castle Bromwich
INGENIUM I4 2.0L
Petrol
F-PACE (X761)
2018-2019
488023616663
Solihull
INGENIUM I4 2.0L
Petrol
XE (X760)
2018-2020
P26896P57662
Castle Bromwich
INGENIUM I4 2.0L
Petrol
XF (X260)
2018-2020
Y46487Y85151
Castle Bromwich
INGENIUM I4 2.0L
Petrol
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
The Malfunction Indicator Lamp (MIL) is illuminated on the Instrument Panel Cluster (IPC)
with a small loss in performance and reduction in accelerator response.
The following Diagnostic Trouble Code(s) (DTC)s may possibly be stored in the Powertrain
Control Module (PCM):
• P0011-71 - 'A' Camsha Position - Timing Over - Advanced or System
Performance Bank 1 - Actuator stuck
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
2/7
3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
• P000A-00 - 'A' Camsha Position Slow Response Bank 1
• P0014-71 - 'B' Camsha Position - Timing Over - Advanced or System
Performance Bank 1 - Actuator stuck
• P000B-00 - 'B' Camsha Position Slow Response Bank 1
• P054A-00 - Cold Start 'B' Camsha Position Timing Over - Advanced Bank 1
• P013E-00 - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2
• P0016-00 - Cranksha Position - Camsha Position Correlation Bank 1 Sensor A
CAUSE:
Insuﬃcient wear resistance of the Variable Camsha Timing (VCT) solenoid bush.
ACTION:
Follow the instructions below.
PARTS:
PART NUMBER
DESCRIPTION
QUANTITY
T2H48301
Jaguar - VCT solenoid - Kit
1
LR140207
Land Rover - VCT solenoid - Kit
1
TOOLS:
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
3/7
3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635

Jaguar Land Rover (JLR)
approved diagnostic equipment

JLR approved battery support
unit
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
DESCRIPTION
JLRTB02023 - Guided Diagnostics Application
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL PART
85.99.18
0.2
42
LR126832/T4N32636
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
4/7
3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL PART
Range Rover Sport, Range Rover Velar,
Discovery, F-PACE, XF and XE - VCT
solenoid - Engine set - Renew
18.31.51
1
42
LR126832/T4N32636
New Range Rover Evoque, Range
Rover Evoque, Discovery Sport and EPACE - VCT solenoid - Engine set Renew
18.31.51
0.3
42
LR126832/T4N32636
F-TYPE - VCT solenoid - Engine set Renew
18.31.51
0.2
42
T4N32636
DESCRIPTION
NOTE:
Normal Warranty procedures apply.
SERVICE INSTRUCTION:
NOTE:
Do not clear the PCM DTCs before completing this guided diagnostic routine. The
following steps will test the function of the intake and exhaust camsha VCT
solenoids.
1.
CAUTION:
This procedure requires a minimum of Pathﬁnder 261 installed or later.
NOTES:
The Jaguar Land Rover (JLR) approved diagnostic equipment will read the
Vehicle Identiﬁcation Number (VIN) for the vehicle and automatically
take the vehicle out of ‘Transportation Mode’ if required.
All ignition ON/OFF instructions must be followed. Failure to complete
these instructions may cause damage to the vehicle control modules.
Connect the JLR approved battery support unit.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
5/7
3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
2.
Connect the JLR approved diagnostic equipment to the vehicle and begin a new
session.
3.
Follow the JLR approved diagnostic equipment prompts.
Select 'Guided Diagnostics'.
Select 'Warnings - Lamps - Engine Malfunction Indicator Lamp
(MIL)'.
Follow all on-screen instructions to complete the task.
If the guided diagnostic routine did not identify a fault with
either of the VCT solenoids, complete steps 6 to 8 and
continue to diagnose the customer concern using the
applicable diagnosis and testing section within the TOPIx
Workshop Manual.
If the guided diagnostic routine did identify a fault with either
of the VCT solenoids, continue to step 4.
4.
NOTE:
In this instance, the VCT solenoids must be renewed as a pair. If a single
VCT solenoid is diagnosed as failed in the future, only renew the failed
component.
Renew both VCT solenoids (see TOPIx Workshop Manual section 303-14:
Electronic Engine Controls - INGENIUM I4 2.0L Petrol - Remove and Installation Variable Camsha Timing Solenoid).
5.
Select 'ECU Diagnostics'.
Select 'All DTCs'.
Select 'Clear all DTCs'.
Follow all on-screen instructions to complete this task.
6.
If required, reset the vehicle to ‘Transportation Mode’.
7.
When all of the tasks are complete, exit the session.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
6/7
3/6/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
8.
Disconnect the JLR approved diagnostic equipment and the JLR approved battery
support unit.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1583493728635
7/7