A6420712048934_5
Service Bulletin Details
Public Details for: A6420712048934_5
This bulletin contains a software update to correct an intermittent condition where the after closing the convertible top, the rear quarter glass rolls down automatically.
Models from 2020
2020 AUDI A5 CABRIOLET |
Models from 2019
2019 AUDI A5 CABRIOLET |
Models from 2018
2018 AUDI A5 CABRIOLET |
64 Rear quarter glass intermittently retracts after closing convertible top 64 20 71 2048934/5 April 7, 2020. Supersedes Technical Service Bulletin Group 64 number 19-63 dated February 7, 2019 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A5 Cabriolet 2018 - 2020 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 5 - Revised header (Added Model Years) Revised Service (Updated SW Version in the table) 4 02/07/2019 Revised Service (Added Tip) 3 10/19/2018 Revised header (Added filters and updated VIN break) Revised Service (Updated SVM table versions) Revised Warranty (Added Labor Operation) Customer states: After operating the convertible top, the rear quarter glass rolls down automatically. This condition occurs intermittently and can occur on one, or both rear quarter glass. Technical Background Not applicable. Production Solution New software in the front passenger door control module, J387 (address word 0052) and driver door control module, J386 (address word 0042) addressed the condition. Page 1 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the driver door control module, J386 (address word 0042) or the front passenger door control module, J387 (address word 0052) using the SVM action code as listed in the table below, if necessary: Tip: Prior to starting the SVM update, open all windows completely, then fully close all windows via the driver’s door window switches. This will help to ensure that the door control modules are properly read into ODIS. Model Control Module Diagnostic Address A5 Cab 0042 A5 Cab 0052 Old Software Part Number New Software Part Number New Software New ZDC Version SVM Code Input (or higher) 4M0959793F 4M0959793H 4M0959792F 4M0959792H 4M0959793H 0131 4M0959792H 0131 8W5909873G 8W5909872G 42A014 42A014 3. Perform basic settings of all four windows. Warranty Claim Type: 110 up to 48 Months/50,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 6438 Damage Code: 0039 Labor Operations: Software Update 0151 0000 Time stated on the diagnostic protocol (Max 100 TU) Page 2 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Diagnostic Time: Claim Comment: GFF No allowance 0 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU As per TSB #2048934/5 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information The following Technical Service Bulletin(s) will be necessary to complete this procedure: TSB 2011732, 00 Software Version Management (SVM), operating instructions. All parts and service references provided in this TSB (2048934) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 3 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.