A9420242050234_4
Service Bulletin Details
Public Details for: A9420242050234_4
This bulletin contains repair instructions regarding when the rear lights do not switch from bumper to hatchgate after closing with dtc B146C29.
Models from 2020
2020 AUDI Q5 |
Models from 2019
2019 AUDI Q5 |
Models from 2018
2018 AUDI Q5 |
94 Rear lights do not switch from bumper to hatchgate after closing 94 20 24 2050234/4 April 21, 2020. Supersedes Technical Service Bulletin Group 94 number 19-02 dated February 7, 2019 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment Q5 2018 - 2020 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 4 - Revised header (Added MY 2020 and 2021) Revised Production Solution (Solution modified) Revised Service (Service procedure modified) Revised Warranty (Additional repair option SRT) 3 02/07/2019 Revised header (Added MY 2019 with VIN break) Revised Production Solution (Solution specified) Revised Service (Description of solution) Revised Warranty (Removed temporary solution) Revised Required Parts and Tools (Remove ‘if necessary’ statement) 2 07/17/2018 Revised Warranty (Updated Damage Code) Customer may report: Brake light warning on in instrument cluster. When the rear lid is closed, the lights in the rear bumper do not switch over to the main lights on the rear lid. All of the rear light bulbs are fully functional. None are found to be faulty or incorrect. Workshop findings: The following DTC may be stored in the comfort system central control module, J393 (address 0046): DTC B146C29 (Rear lid -closed- sensor implausible signal). Page 1 of 4 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Background When opening the rear lid on the Q5 the rear lighting changes from the rear lid to the bumper and when closing the rear lid the lighting changes back to the rear lid. The two micro switches for the reverse light change-over are under the loading sill cover on the rear cross panel and are secured to the striker for the rear lid lock (Figure 1). The following problems can occur: 1. The paddle on the micro switch was broken due to adjustment of the rear hatch or the striker in production. 2. Dirt can block one/both paddles on the micro switch, which is fastened to the striker of the rear lid (Figure 2). Figure 1. Rear lid closed sensor. Figure 2. Debris trapped in the rear lid closed sensor. Page 2 of 4 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Production Solution Adjustment of rear hatch optimized. The rear lid closed sensor assembly with additional enclosure to protect the switches from debris ingress is now installed. This improves the debris resistance of the switches but cannot eliminate it entirely. Service 1. Replace the rear lid closed sensor if found broken (Figure 1). 2. If debris is found to be obstructing proper switch activation/deactivation, activate the switch paddles using your fingers and remove the debris. Using compressed air is effective. 3. Then check the measuring values for the G525 and G526 switches and replace the rear lid closed sensor if the malfunction persists. Only the improved rear lid closed sensor with the protective enclosure is available. Warranty Claim Type: 110 up to 48 Months/50,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9661 Damage Code: 0015 Labor Operations: Lock carrier cover remove + reinstall 7039 1900 See SRT Rear Lid Closed Sensor G525/G526 replacement 9661 1950 See SRT Rear Lid Closed Sensor G525/G526 - repair 9661 9999 30 TU GFF 0150 0000 20 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Or Diagnostic Time: Claim Comment: As per TSB #2050234/4 Page 3 of 4 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Part Number Part Description Quantity See ETKA Rear Lid Closed Sensor 01 See ETKA Fasteners, Bolts, Nuts, and Screws as needed per the Repair Manual See ETKA/ELSA Additional Information All parts and service references provided in this TSB (2050234) are subject to change and/or removal. ©2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 4 of 4 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.