SSM 48717

Service Bulletin Details

Public Details for: SSM 48717

Some 2020 f-super duty vehicles equipped with the blind spot information system (blis) and cross traffic alert (cta) may require the removal of the factory equipped tail lamps to accommodate the use of aftermarket equipment. Once the tail l


- 2020 -

Models from 2020
2020 FORD F-250 SD
2020 FORD F-350 SD
2020 FORD F-450 SD
2020 FORD F-550 SD 
SSM 48717 - 2020 F-Super Duty - Blind Spot Information System (BLIS)
and Cross Traffic Alert (CTA) FDRS Configuration
Some 2020 F-Super Duty vehicles equipped with the Blind Spot Information System (BLIS) and Cross Traffic Alert
(CTA) may require the removal of the factory equipped tail lamps to accommodate the use of aftermarket equipment.
Once the tail lamps are removed, this may result in BLIS and CTA warning indicators illuminated in the instrument
panel cluster (IPC). To clear these warning indicators, the BLIS and CTA systems will need to be disabled using the
FDRS scan tool. Start a vehicle session in FDRS using the vehicles VIN and go to the toolbox tab. The BCM will have
an application labeled Disable/Enable Blind Spot Information System. Download and run this application to enable or
disable the BLIS And CTA systems.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.