SSM74827

Special Service Message
NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the
same importance of a Technical Service Bulletin. An SSM is a quick method of communicating
"Need To Know" information to the technical service community. SSM's may be issued in advance
of a technical bulletin or may be the only communication on a given topic. All information
contained in Jaguar technical communications are intended for use by trained, professional
technicians with the knowledge, tools, and equipment required to complete the procedure
correctly and safely. It informs the Technicians of conditions that may occur on some vehicles, or
provides information that could assist in correct vehicle and diagnostic service.
SSM 74827 - E-Pace / AJ20 Ingenium Engines
- Coolant System Level Overfill
Models : E-Pace / X540
Engineer :Chris Davies
Date Last 27 MAY 2020 07:45:14
Updated :
Content :Issue:
Retailers may report the coolant level is over the maximum fill line at PDI.
Cause:
Vehicles manufactured after 28/08/17 will arrive with a factory overfill condition.
This is intentional due to air being trapped during fluid fill in manufacturing.
The level will settle during the first year of service.
Action:
No action is required if this condition is observed during PDI.
Do not remove any fluid.
During normal service and warranty repairs please continue to re-fill or
top-up the coolant system as per TOPIx procedures.
Version : 1
Jaguar Land Rover Limited 2000 - 2020 (Rel. 2678)