A0120662059514_2

Service Bulletin Details

Public Details for: A0120662059514_2

This bulletin contains a softwre updaet that addresses dtc P013B00 and/or P013A00.


- 2018 -

Models from 2018
2018 AUDI Q5
01 MIL on, DTC P013A00 and/or P013B00 are stored in the ECM
01 20 66 2059514/2 June 8, 2020. Supersedes Technical Service Bulletin Group 01 number 20-64 dated May 19,
2020 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
Q5
2018
All
2.0 TFSI
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised header (Corrected Elsa display issue)
Revised Technical Background (Updated information)
Revised Service (Added reference)
Revised Warranty (Added Claim Type)
1
05/19/2020
Initial publication
Customer states:
 MIL on.
Workshop findings:
One or more of the following DTC(s) is stored in the engine control module (ECM), J623 (address word 0001):
 DTC P013B00 (O2 Sensor Bank1-Sensor 2 Slow response – Lean to Rich).
 DTC P013A00 (O2 Sensor Bank1-Sensor 2 Slow Response – Rich to Lean).
Technical Background
A software bug allows the check engine light to illuminate without reason.
Production Solution
Updated software in the engine control module (ECM), J623 (address word 0001) addressed the condition.
Page 1 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Service
This TSB replaces Pending Service Solution (PSS) TSB 2056410: PSS 01 MIL on, DTC P013B00 and/or
P013A00 stored in the ECM.
Note:
Parts replacement does not solve this issue, claims for replaced parts will not be reimbursed.
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the engine control module (ECM), J623 (address word 0001) using the SVM action code as listed in
the table below, if necessary:
Model
Engine
Q5
2.0 TFSI
Old Software
Part Number
80A906259A
Old
Software
Version
0001-0003
New Software
Part Number
New Software
Version
(or higher)
(or higher)
80A906259A
SVM Code
Input
0004
01A209
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 1E1 up to 8 Years/80,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max
50 TU)
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Page 2 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Road test after the service procedure
Claim Comment:
No allowance
0 TU
As per TSB #2059514/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin may be necessary to complete this procedure:
 TSB 2056410, PSS 01 MIL on, DTC P013B00 and/or P013A00 stored in the ECM.
 TSB 2011732, 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2059514) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Page 3 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.