21A7S7RS7THRP702

2021
A7/A7 PHEV/S7/RS 7
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Guided Fault Finding must be used, session must be completed and sent to GFF Paperless
 Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test)
 Start Guided Fault Finding with the engine running to ensure control modules in transport mode are identified
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Check battery clamps for proper torque*
 Verify Audi phone box customer registration form is present
in vehicle and add the serial number from Elsa (if equipped).
See TSB 2051720
 Place one PR Number Label in the Warranty and Maintenance Book inside front cover and one on the Rear Panel Sill
Frame under the luggage compartment floor, if not already
there*
 Perform any open campaigns*
 Perform diagnostics work*
 Install front license plate carrier (if necessary)*
Exterior
 Check all key buttons and features*
 Check all doors for proper power closing (if equipped)*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
Interior
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel (if equipped, otherwise, ignore
DTC B153813)
Lighting and Windshield
 Verify operation heated/ventilated and massaging seats (if
equipped)*
 Test exterior lighting functions
 Verify operation of manual folding 2nd row
 Test windshield washers (and headlight washers if
equipped) Correct aim if necessary*
 Verify proper operation of climate control*
Trunk Inspection
 Inspect operation of all power outlets*
 Check sunroof and sunshade operation*
 Verify trunk is operational
 Verify operation of front Passenger Occupant Detection
System
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify operation of rear side manual sunshades (if equipped)
 Verify tool kit is installed securely in luggage compartment
 Verify operation of power rear sunshade (if equipped)
 Set spare tire pressure (if equipped)*
Effective 7-2-2020-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 1
2021
A7/A7 PHEV/S7/RS 7
Audi Pre-Delivery Inspection
Settings
Driving Performance (continued)
 Verify operation of MMI® touch screens, upper and lower
 Verify rear spoiler functionality (if equipped)
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Check steering/tire alignment
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Music volume while parking” to medium*
 Set dealership location in navigation*
 Turn off Manual Speed Warning (if equipped)*
Media / Radio / SAT
 Verify operation of all USB ports
 Verify operation of aux. input
 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of slot
 Program the presets to local stations
 Verify HD Radio is turned “off”*
On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction).
For vehicles with sport suspension 1BE: Ensure transport
blocks under dust boot are removed
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Driver Assistance
 Verify all cruise control functions
 Verify cruise control/ACC with Stop & Go functionality (if
equipped), which includes the following:
 Adaptive Cruise Assist
 Turn Assist
 Intersection Assistant
 Traffic Jam Assist
 Predictive Efficiency Assist
 Active lane assist with emergency assistant
 Traffic sign recognition
 Verify Audi side assist functionality Pre sense® rear (if
equipped)
 Remove locking elements on front axle suspension struts
(For vehicles with sport suspension 1BE)*
 Verify operation of night vision camera (if equipped)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Verify all vehicle Head-up display functionality (if equipped)*
 Check underside of vehicle for fluid leaks and loose components
 Activate NAV and follow directions back to dealership
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Inspect wheel bolts for proper torque*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles
 Test drive vehicle applying brakes several times*
 Verify operation of parking system*
 Verify operation of High-beam assistant (if equipped)
Post-Road Test Inspection
 Verify SOS button is green and Roadside assistance button
LED will remain off
 It may take up to 20 minutes for the emergency call system to activate (LED turns green) after flight/transport
mode deactivation
 The vehicle must not be delivered to the customer if the
emergency call function has not been successfully activated (LED lights up in green)
 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed
 Check engine oil level*
 Check all fluid levels and top off if necessary
 Check adaptive air suspension in all positions (if equipped)
Effective 7-2-2020-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 2
2021
A7/A7 PHEV/S7/RS 7
Audi Pre-Delivery Inspection
Post-Road Test Inspection (continued)
Audi connect® (USA ONLY)
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Turn on the Wi-Fi® hotspot (if equipped)*
 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**
 Check Wi-Fi® hotspot visibility. No data available at PDI due
to dealer demo mode (if equipped)*
 Enable satellite map view for navigation (if equipped)*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 7-2-2020-US
Version 1.0
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3