SSM 49011

Service Bulletin Details

Public Details for: SSM 49011

Some 2020 explorer/aviator vehicles built on or before 13-dec-2019 may exhibit a hard brake pedal or reduced pedal travel when the transmission is initially placed in gear with no diagnostic trouble codes (dtcs) stored in the anti-lock brak


- 2020 -

SSM 49011 - 2020 Explorer/Aviator – Temporary Change in Brake Pedal Feel
When Transmission Initially Placed In Gear With No DTCs - Built On Or
Before 13-Dec-2019
Some 2020 Explorer/Aviator vehicles built on or before 13-Dec-2019 may exhibit a hard brake pedal
or reduced pedal travel when the transmission is initially placed in gear with no diagnostic trouble
codes (DTCs) stored in the anti-lock brake system (ABS) module. This condition only occurs at initial
vehicle start-up and will no longer be present after the brake pedal is released and re-applied during
the same key cycle. This is not a lack of power brake assist. This may be caused by the software in
the ABS module. To correct the condition, reprogram the ABS module using the latest software level
of the appropriate Ford diagnostic scan tool. For claiming, use causal part 2005 and applicable labor
operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
APPLICABLE VEHICLES
2020 CAR: TV U611N AVIATOR
2020 CAR: TW U625N EXPLORER


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.