No. 112-20
Service Bulletin Details
Public Details for: No. 112-20
Instructions for folding over the floor covering in the driver's footwell in the event that the fuse box cannot be opened.
- 2020 -
Models from 2020
2020 PORSCHE CAYENNE |
Service Technical Information 112/20 ENU 7041 7 Complaint - Fuse Box in Driver's Footwell Cannot Be Opened: Folding Over Floor Covering (112/20) Model Line: Cayenne (9YA/9YB) Model Year: As of 2020 Equipment: Right-hand traffic (I-no. AV1, AV2) Subject: Front floor covering Information: Information Please also pass this information on to your sales staff in order to inform the customer about this if necessary. The floor covering in the footwell on the driver's side is installed without a cut-out for the fuse box since week 28/20. To access the fuse box, proceed as follows: 1 Remove cover on footrest fastening screw using a flat screwdriver. 2 Unscrew upper part of footrest using a Torx screwdriver, fold it towards the seats and remove it. 3 Lift up floor covering along the perforation Floor covering in footwell on driver's side -1-, detach it and fold it over to the right Floor covering in footwell on driver's side -Arrows-. Floor covering in footwell on driver's side Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2020 Porsche Cars North America, Inc. AfterSales Jul 31, 2020 Page 1 of 1