A0120772045673_4

Service Bulletin Details

Public Details for: A0120772045673_4

This bulletin provides instructions regarding an svm update needed when a dtc is stored in the engine control module.


- 2018 - 2017 - 2016 -

01 MIL on, DTC P060C00 stored in the ECM
01 20 77 2045673/4 August 17, 2020. Supersedes Technical Service Bulletin Group 01 number 18-55 dated
March 1, 2018 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4, A5, and
Q7
2017 - 2018
All
2.0 and 3.0 TFSI
A6, A7, and
A8
2016 – 2017
All
3.0 TFSI
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised Service (Updated table with A4, A5, A5 Cab, and Q7 software and added
Note)
Revised Warranty (Updated Labor Operation)
3
03/01/2018
Revised header (Added MY 2017 and 2018 A4, A5, A5 Cab, and Q7)
Revised Service (Updated table with new models)
2
07/14/2017
Revised Service (Added A8 and Q7 models)
Customer states:
 MIL on.
Workshop findings:
The following DTC is stored in the engine control module (ECM), J623 (address word 0001):
 DTC P060C00 (Internal Control Module Main Processor Performance).
Technical Background
Not applicable.
Production Solution
Optimized software with improved diagnostics.
Page 1 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Service
Note:
Do not replace the ECM for this fault.
Do not contact the Technical Assistance Center (TAC) unless the problem persists after the software update or if
there is a problem with the SVM process below.
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM using the SVM action code as listed in the table below if necessary:
Model
Engine
C7 A6/A7
3.0T
D4 A8
3.0T
Q7
3.0T
A4/A5
2.0TFSI
Q7
2.0TFSI
Old Software
Part Number
Old
Software
Version
4G2907551A
≤ 0004
4G2907551C
≤ 0001
CREC
4H2907551A
CREC
CREC
New Software
Part Number
New Software
Version
SVM Action
Code
(or higher)
4G2907551C
0003
01A226
≤ 0008
4H2907551A
0008
01A226
4M0907551A
≤ 0005
4M0907551A
0005
01A226
CYMC
8W0906259J
≤ 0002
8W0906259AB
0003
01A221
CYMC
4M0906259A
≤ 0002
4M0906259L
0002
01A221
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 1E1 up to 8 Years/80,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Page 2 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for DTCs) 0151 0000
Time stated on
the diagnostic
protocol (Max 50
TU)
Diagnostic Time:
GFF
0150 0000
20 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Claim Comment:
As per TSB #2045673/4
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2045673) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 3 of 3
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.