21A7A7ES7RS7TEC

2021
A7/A7 PHEV/S7/RS 7
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Guided Fault Finding must be used, session must be completed and sent to GFF Paperless
 Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test)
 Start Guided Fault Finding with the engine running to ensure control modules in transport mode are identified
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Check battery clamps for proper torque*
 Verify Audi phone box customer registration form is present
in vehicle and add the serial number, FCC ID, and Model
from Elsa (if equipped). See TSB 2051720
 Place one PR Number Label in the Warranty and Maintenance Book inside front cover and one on the Rear Panel Sill
Frame under the luggage compartment floor, if not already
there*
 Perform any open campaigns*
 Perform diagnostics work*
 Install front license plate carrier (if necessary)*
Exterior
 Check all key buttons and features*
 Check all doors for proper power closing (if equipped)*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
Interior
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel (if equipped, otherwise, ignore
DTC B153813)
Lighting and Windshield
 Verify operation heated/ventilated and massaging seats (if
equipped)*
 Test exterior lighting functions
 Verify operation of manual folding 2nd row
 Test windshield washers (and headlight washers if
equipped) Correct aim if necessary*
 Verify proper operation of climate control*
Trunk Inspection
 Inspect operation of all power outlets*
 Check sunroof and sunshade operation*
 Verify trunk is operational
 Verify operation of front Passenger Occupant Detection
System
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify operation of rear side manual sunshades (if equipped)
 Verify tool kit is installed securely in luggage compartment
 Verify operation of power rear sunshade (if equipped)
 Set spare tire pressure (if equipped)*
Effective 9-8-2020-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2021
A7/A7 PHEV/S7/RS 7
Audi Pre-Delivery Inspection
Settings
Driving Performance (continued)
 Verify operation of MMI® touch screens, upper and lower
 Test drive vehicle applying brakes several times*
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Check adaptive air suspension in all positions (if equipped)
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Music volume while parking” to medium*
 Set dealership location in navigation*
 Turn off Manual Speed Warning (if equipped)*
 Verify rear spoiler functionality (if equipped)
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Media / Radio / SAT
 Verify operation of all USB ports
 Verify operation of aux. input
 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of slot
 Program the presets to local stations
 Verify HD Radio is turned “off”*
 Confirm SiriusXM is on and in an active state (can scroll
through channels and hear music)
Driver Assistance
 Verify all cruise control functions
 Verify cruise control/ACC with Stop & Go functionality (if
equipped), which includes the following:
 Adaptive Cruise Assist
 Turn Assist
 Intersection Assistant
 Traffic Jam Assist
 Predictive Efficiency Assist
On-Hoist Inspection
 Active lane assist with emergency assistant
 Remove transport suspension blocks (follow ELSA instruction).
For vehicles with sport suspension 1BE: Ensure transport
blocks under dust boot are removed
 Traffic sign recognition
 Verify Audi side assist functionality Pre sense® rear (if
equipped)
 Remove locking elements on front axle suspension struts
(For vehicles with sport suspension 1BE)*
 Verify operation of night vision camera (if equipped)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Verify all vehicle Head-up display functionality (if equipped)*
 Check underside of vehicle for fluid leaks and loose components
 Verify operation of parking system*
 Verify operation of High-beam assistant (if equipped)
 Activate NAV and follow directions back to dealership
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
Post-Road Test Inspection
 Inspect wheel bolts for proper torque*
 Verify SOS button is green and Roadside assistance button
LED will remain off
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles
Effective 9-8-2020-US
Version 1.1
 It may take up to 20 minutes for the emergency call system to activate (LED turns green) after flight/transport
mode deactivation
 The vehicle must not be delivered to the customer if the
emergency call function has not been successfully activated (LED lights up in green)
 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed
PRE-DELIVERY INSPECTION (PDI) | 2
2021
A7/A7 PHEV/S7/RS 7
Audi Pre-Delivery Inspection
Post-Road Test Inspection (continued)
Audi connect® (USA ONLY)
 Check engine oil level*
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check all fluid levels and top off if necessary
 Check Wi-Fi® hotspot visibility. No data available at PDI due
to dealer demo mode (if equipped)*
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Enable satellite map view for navigation (if equipped)*
 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 9-8-2020-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3
Audi Phone Box-Equipped Vehicles
Operation of the Audi Phone Box is subject to the following requirements of the Federal
Communications Commission:
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your
wireless provider and have your provider’s consent. Most
wireless providers consent to the use of signal boosters. Some
providers may not consent to the use of this device on their
network. If you are unsure, contact your service provider.
You MUST operate this device with approved antennas and
cables as specified by the manufacturer. Antennas MUST be
installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested
by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or
may be inaccurate for calls served by using this device.
Make #
FKW
Model #
Serial #
FKW -
FCC ID
CUSTOMER COPY
This Signal Booster fulfills the FCC requirements for the Network Protection
Starndard (NPS). It incorporates features to prevent harmful interference to
wireless networks like:
• Anti-oscillation to detect and mitigate any unintended oscillations in
uplink and downlink frequency bands,
• Adaptive gain control with self-monitoring and to power down
automatically as approaching any affected base station,
• Uplink Inactivity to shut down the transmit amplifiers if not serving
an active device connection.
This Signal Booster includes features to prevent harmful interference. These
features are enabled and operating at all times the signal booster is in use,
they may not be deactivated by the operator.
CUSTOMER COPY