11-004-20

NUMBER:
GROUP:
DATE:
11-004-20
11 - Exhaust System
August 7, 2020
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
SUBJECT:
Diesel Particulate Matter Sensor - Associated to DTCs - P24D1 and P24AE
OVERVIEW:
This bulletin involves replacing the diesel particulate sensor when one or more of the following
Diagnostic Trouble Codes (DTCs) are active in the Powertrain Control Module (PCM).
MODELS:
2019 - 2020
2019 - 2020
(BV)
(MP)
Jeep Renegade
Jeep Compass
NOTE: This bulletin applies to vehicles within the following markets/countries: EMEA.
NOTE: This bulletin applies to (BV) vehicles built on or before December 17, 2019 (MDH
1217XX) equipped with 1.6L I4 B ECO Turbo Diesel Engine W/ESS (Sales Codes EJJ)
or 2.0L I4 Turbo Diesel Engine W/ ESS (Sales Codes EBS).
NOTE: This bulletin applies to (MP) vehicles built on or before January 22, 2020 (MDH
0122XX) equipped with 1.6L I4 B ECO Turbo Diesel Engine W/ESS (Sales Codes EJJ)
or 2.0L I4 Turbo Diesel Engine W/ ESS (Sales Codes EBS).
SYMPTOM/CONDITION:
Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further
investigation the technician may find one or more of the following DTCs.
• P24D1-00 - Particulate Matter Sensor Regeneration Incomplete.
• P24AE-00 - Particulate Matter Sensor Circuit.
DIAGNOSIS:
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in
DealerCONNECT/Service Library, verify all engine systems are functioning as designed. If DTCs or
symptom conditions, other than the ones listed above are present, record the issues on the repair
order and repair as necessary before proceeding further with this bulletin.
If the customer describes the symptom/condition listed above or if the technician finds the DTC,
perform the Repair Procedure.
11-004-20
-2-
PARTS REQUIRED:
Qty.
1 (AR)
Part No.
Mopar Part#
68510753AA
EMEA Local Sourced Part#
46345721
Description
Sensor, Particulate Matter
(BV)
1 (AR)
Mopar Part#
68365997AD
EMEA Local Sourced Part#
50057241
Sensor, Particulate Matter
(MP)
REPAIR PROCEDURE:
1. Perform and save a scan report.
2. Replace the diesel particulate matter sensor. Refer to the detailed service procedures available
in DealerCONNECT> Service Library under: Service Info> Exhaust System / Sensor, Particulate
Matter / Removal and Installation.
3. Clear any DTCs, using wiTECH application will automatically present all DTCs and allow them
to be cleared.
4. If one or more of these DTCs set again. Normal DTC diagnostic need to be performed.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation
No:
Description
Skill Category
Amount
25-07-02-90
Diesel Particulate Matter Sensor Remove and Install
(1 - Semi-Skilled)
10 Diesel
0.6 Hrs.
FAILURE CODE:
ZZ
Service Action