09-006-16

Service Bulletin Details

Public Details for: 09-006-16

2.0l or 2.4l long block replacement this bulletin involves replacing the long block due to incorrect machining operation on the cylinder head. The customer may describe the engine is consuming oil.


- 2015 -

NUMBER:
GROUP:
DATE:
09-006-16
Engine
May 10, 2016
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE
TRANSMITTAL (RRT) 16-038. ALL APPLICABLE UN-SOLD RRT VIN's HAVE BEEN
LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE
VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS
ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.
SUBJECT:
2.0L Or 2.4L Long Block Replacement
OVERVIEW:
This bulletin involves replacing the long block due to incorrect machining operation on the
cylinder head.
MODELS:
2015
(JC)
Dodge Journey
2015
(MK)
Jeep Compass
NOTE: This bulletin applies to vehicles within the following markets/countries:
NAFTA, APAC and EMEA.
NOTE: This bulletin applies to the following vehicles:
• MK vehicles equipped with a 2.0L I4 DOHC 16V Dual VVT Engine (Sales
Code ECN) or a 2.4L I4 DOHC 16V Dual VVT Engine (Sales Code ED3)
built on or after May 06, 2015 (MDH 0506XX) and on or before June 18,
2015 (MDH 0618XX).
• JC vehicles equipped with a 2.4L I4 DOHC 16V Dual VVT Engine (Sales
Code ED3) built on or after May 05, 2015 (MDH 0505XX) and on or
before June 24, 2015 (MDH 0624XX).
SYMPTOM/CONDITION:
The customer may describe the engine is consuming oil.
DIAGNOSIS:
If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other
customers that describe the symptom/condition listed above, perform normal diagnostics.
09-006-16
-2-
PARTS REQUIRED:
Qty.
Part No.
Description
1
Contact Powertrain Service
Center
Long Block
REPAIR PROCEDURE:
Replace the long block assembly. Contact Powertrain Service Center for replacement
engine assembly and refer to the detailed service procedures available in
DealerCONNECT> TechCONNECT under: Service Info> 09 - Engine, 2.0L
World/Removal/Installation (Sales Code ECN) or Service Info> 09 - Engine, 2.4L
World/Removal/Installation (Sales Code ED3).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation
No:
Description
Skill Category
09-01-70-92
2.0L or 2.4L Long Block - Replace
(Sales Codes ECN or ED3) MK
Vehicles
(3 - Highly Skilled)
09-01-70-93
2.4L Long Block - Replace (Sales Code 1 - Engine
ED3) JC Vehicles
Repair and
(3 - Highly Skilled)
Performance
Labor Operation
No:
Related
1 - Engine
Skill Category
Amount
7.8 Hrs.
7.6 Hrs.
Amount
09-01-70-6A
AWD Equipped
(3 - Highly Skilled)
1 - Engine
Repair and
Performance
0.9 Hrs.
09-01-70-6B
Manual Transmission Equipped
(3 - Highly Skilled)
1 - Engine
Repair and
Performance
0.3 Hrs.
FAILURE CODE:
ZZ
Service Action


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.