KC-901

10/30/2020
Content creation stages KC-901
Remote Control Central Door Lock,
Programming; Key Fob Cannot Be Programmed
Or Does Not Work After Programming - Model
Year 2018 And Newer
:


Internal Content
Related links and
attachments
No links or
attachments available
Due to the ECU's extended power down time it is recommended to
move the ignition switch to the drive position and remove battery
power fuse to the central door lock module (at the time of this
article's writing the fuse number is F84) 4 times as an alternative to
cycling the ignition switch 4 times. Doing this will power down the
system faster so this step can be completed within the 15 second
time frame. The remaining steps are as follows.
1. The direction indicator lamps remain on and the system is now
ready to be programmed.
Note: The instrument cluster does not indicate programming
mode.
2. Press button 1 or 2 on the original remote control.
Note: It is recommended that at least one remote control to be
secured at all times, to avoid the replacement of the moduleremote control pair, if both original remote controls are missing.
Note: This step is a security feature.
3. The direction indicator lamps turn o for approx. 1 second to
indicate that the module has recognized the original remote control.
Note: No reprogramming is possible without an original remote
control.
4. Press button 1 or 2 on each remote control that is desired to be
programmed.
5. The direction indicator lamps go out for approx. 1 second to
indicate that the new remote control has been added.
6. To program the next remote control repeat Step 4. The system will
exit programming status after 15 seconds if no additional remote
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD7?pyActivity=%40baseclass.pzProcess…
1/2
10/30/2020
Content creation stages KC-901
controls are programmed. This is also the maximum time between
activating the remote control within the programming cycle. The
system will also exit after eight remote controls are programmed.
7. When the remote control returns to the 'Normal' mode, If no
buttons are pressed, then the last remote control programmed,
remains current for the system.
Note: Due to the security feature, all desired remote controls to be
programmed must be programmed, before the programming mode
is exited into the Normal mode. To add a new remote control and
keep the previous ones, all steps must be taken again having all the
controls ready. The module starts each programming process anew.
a
Tags
CENTRAL DOOR LOCKS
CENTRAL DOOR LOCK PROGRAMMING
K10075112
Feedback
Give feedback to help improve the content of this article
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD7?pyActivity=%40baseclass.pzProcess…
2/2