21Q5Q5eSQ5TECRP
Service Bulletin Details
Public Details for: 21Q5Q5eSQ5TECRP
Driver assistance section: added: "activate rear cross traffic assist (if equipped)"
- 2021 -
Models from 2021
2021 AUDI Q5 |
2021 AUDI Q5 PHEV |
2021 AUDI SQ5 |
2021 Q5/Q5 PHEV/SQ5 Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by a certified Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection Guided Fault Finding must be used, session must be completed and sent to GFF Paperless Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test) Start Guided Fault Finding with the engine running to ensure control modules in transport mode are identified For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Trunk Inspection (continued) Check Elsa for open campaigns and updates Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Perform any open campaigns* Verify Audi phone box customer registration form is present in vehicle and add the serial number, FCC ID, and Model from Elsa (if equipped). See TSB 2051720 Set adaption channel to enable CD Ripping using Guided Functions (if equipped with NAV)* Perform any open campaigns* Verify tool kit is installed securely in luggage compartment Verify inflatable spare tire and compressor are present Set spare tire pressure* Check battery clamps for proper torque* Verify operation of luggage cover Perform diagnostics work* Interior Install front license plate carrier (if necessary)* Verify operation of all seat belts and latches Exterior Check all key buttons and features* Check all doors for proper power closing (if equipped)* Inspect exterior for damage, dings, dents and surface scratches. Report and repair any damage before delivery to the customer Check operation of window, lock, and seat controls* Inspect mirrors for proper operation* Check rear view mirror operation* Verify operation of all interior lights Check heated steering wheel operation (if equipped) Verify operation of heated seats Prepare the base bars for customer delivery (install bars only upon customer request)* Verify operation of ventilated seats (if equipped) Lighting and Windshield Verify operation of manual folding 2nd row Test exterior lighting functions Verify proper operation of climate control* Test windshield washers. Correct aim if necessary Inspect operation of all power outlets* Trunk Inspection Check panoramic sunroof and sunshade operation (if equipped)* Verify power tailgate is operational and set default opening height* Effective 10-29-2020-US Version 1.2 Verify operation of rear heated seats (if equipped) Verify the glove compartment opens and closes properly PRE-DELIVERY INSPECTION (PDI) | 1 2021 Q5/Q5 PHEV/SQ5 Audi Pre-Delivery Inspection Interior (continued) Driving Performance Verify operation of front Passenger Occupant Detection System Check horn operation Settings Verify operation of MMI® touch pad (if equipped) Set Time source setting to “GPS” and set Auto daylight savings time to “on”* Set Time to “Automatic setting” and “Automatic time zone” Verify and set language and measurement units* For the Q5 TFSI e: Go to the Menu – MMI Settings – Measurement Units – E-motor consumption – change to mi/kWh Verify Speech Dialog System is operating* Set “Entertain. Fad.” in Parking aid to an audible level* Set “Music volume while parking” to 6 lines* Set dealership location in navigation (if equipped)* Turn off Manual Speed Warning (if equipped)* Media / Radio / SAT Verify operation of all USB ports Verify hold and release of electronic parking brake Verify engine Start-Stop System functionality* Verify engine performance and acceleration* Verify transmission operation, including shift paddles (if equipped) Test drive vehicle applying brakes several times* Check adaptive air suspension in all positions (if applicable) Check steering/tire alignment Check for squeaks, rattles and wind noise. Repair any squeaks, rattles or wind noises before delivery to the customer Calibrate rear view mirror* Verify quality of radio reception in AM/FM/SiriusXM® bands Driver Assistance Verify cruise control/ACC with Stop & Go functionality (if equipped) Verify Audi side assist functionality (if equipped) Verify operation of AMI or aux. input (if equipped) Verify Audi side assist functionality Pre sense® rear (if equipped) Verify operation of CD/DVD player (if equipped) Verify Audi active lane assist functionality (if equipped) Insert SD card and test function of all slots Verify operation of parking system (if equipped)* Program the presets to local stations Activate rear cross traffic assist (if equipped) Verify HD Radio is turned “off”* Verify operation of Traffic Sign Recognition (if equipped) Confirm SiriusXM is on and in an active state (can scroll through channels and hear music) Verify all vehicle Head-up display functionality (if equipped)* On-Hoist Inspection Activate NAV and follow directions back to dealership (if equipped) Remove transport suspension blocks (follow ELSA instruction) Check steering, boots, brake system, hoses, tires and wheels for damage Check underside of vehicle for fluid leaks and loose components Install wheel locks (if equipped) Install wheel bolt covers and center caps as supplied* Inspect wheel bolts for proper torque* Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Verify operation of High-beam assist Post-Road Test Inspection Verify SOS button is green and Roadside assistance button LED will remain off It may take up to 20 minutes for the emergency call system to activate (LED turns green) after flight/transport mode deactivation The vehicle must not be delivered to the customer if the emergency call function has not been successfully activated (LED lights up in green) Interrogate fault memory and upload Diagnostic Log to GFF Paperless Server Check service interval and verify correct interval is displayed Effective 10-29-2020-US Version 1.2 PRE-DELIVERY INSPECTION (PDI) | 2 2021 Q5/Q5 PHEV/SQ5 Audi Pre-Delivery Inspection Post-Road Test Inspection (continued) Audi connect® (USA ONLY) (if equipped) Check engine oil level* Turn on the Wi-Fi® hotspot (if equipped)* Check all fluid levels and top off if necessary Check Wi-Fi® hotspot visibility. No data available at PDI (if equipped)* Ensure the yellow tire pressure tag is installed on the steering wheel Apply 30 Day Inventory Maintenance Sticker** Enable satellite map view for navigation (if equipped)*PostRoad Test Inspection (continued) Install showroom charger to ensure battery remains charged at all times** Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 10-29-2020-US Version 1.2 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 3 Audi Phone Box-Equipped Vehicles Operation of the Audi Phone Box is subject to the following requirements of the Federal Communications Commission: This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your service provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Make # FKW Model # Serial # FKW - FCC ID CUSTOMER COPY This Signal Booster fulfills the FCC requirements for the Network Protection Starndard (NPS). It incorporates features to prevent harmful interference to wireless networks like: • Anti-oscillation to detect and mitigate any unintended oscillations in uplink and downlink frequency bands, • Adaptive gain control with self-monitoring and to power down automatically as approaching any affected base station, • Uplink Inactivity to shut down the transmit amplifiers if not serving an active device connection. This Signal Booster includes features to prevent harmful interference. These features are enabled and operating at all times the signal booster is in use, they may not be deactivated by the operator. CUSTOMER COPY