SMB86-001P-2020-
Service Bulletin Details
Public Details for: SMB86-001P-2020-
This is a service manager bulletin: polestar front license plate fitment
Models from 2021
2021 POLESTAR POLESTAR 1 |
2021 POLESTAR POLESTAR 2 |
Models from 2020
2020 POLESTAR POLESTAR 1 |
Polestar Service and Parts Business Service Manager Bulletin TITLE: Polestar Front License Plate Fitment GROUP: NO: 86 001P ISSUING DEPARTMENT: CAR MARKET: United States and Canada REVISIONS: ISSUE DATE: STATUS DATE: 2020-10-14 2020-10-14 Page 1 of 1 Due to the small number of Polestar Retailers it is likely that you will be delivering vehicles to out of state customers. Please consult the local requirements in the state where the vehicle is being registered for fitment of a front license plate. Polestar 1 All Polestar 1 vehicles will be delivered to the Retailer with a front license plate bracket fitted. The bracket is part of the vehicles low speed impact crash requirements and must be installed when the vehicle is delivered to the customer. Polestar have provided a batch of ‘Polestar 1’ vanity plates to all retailers which can be fitted in lieu of a front license plate for states that do not require one. Polestar 2 All Polestar 2 vehicles will be delivered to the Retailer without the front license plate bracket fitted. The plastic molded bracket will be provided in the trunk of each vehicle. Please consult with the requirements in the state of registration and the customer prior to fitting the bracket. Do not automatically fit the bracket at PDS in case the customer does not require it to be fitted. For Polestar 2 front license plate fitting instructions and hardware please consult Technical Journal 35629.1.1. Produced and printed in the USA and available as an electronic document. © Polestar 2020