P0A33 2021 Rogue




|
P0A33 | Original Document
P0A33 – 2021 ROGUE
FINAL DRIVE BREAK-IN
SERVICE PROCEDURE:
Caution:

Read this entire procedure prior to performing.

Make sure this procedure is performed in a parking lot with no
pedestrians, obstacles or other vehicles present.
1. Verify both the extended storage switch and the BCM transit mode have been
disabled.
2. Ensure the vehicle is at ambient temperature.
 If the vehicle is above ambient temperature, allow the vehicle to sit for at least 30
minutes before proceeding.
3. Verify the AWD selector is in AUTO
mode. (Figure 1)
AUTO Mode
Figure 1
4. Drive sixteen (16) figure-8 patterns in a parking lot.


The vehicle MUST maintain a constant speed of 10mph.
The steering angle MUST be at full lock.
NOTE:
While performing the drive pattern there may be a vibration feeling that should reduce
with each circuit as the AWD clutch breaks-in.
5. If the vibration is not resolved after performing Step 4, repeat Step 4.

Step 4 can be performed a maximum of 3 times.
NOTE: If vibration is still present after performing this procedure, use the ESM for
further diagnosis.
Page 1 of 2
CLAIMS INFORMATION
Submit claim using the following claims coding:
Work Order Line Type: “CM” Campaign
Campaign: P0A33
Claim Type:
CM
PNC:
P0A33
Symptom:
ZZ
Diagnosis:
99
Description:
Op
Codes
Flat
Rate
Time
Parts
Required
on Claim
Expense
Code
Required
Perform Figure-8 Drive Pattern
P0A330
0.4 Hr
NO
NO
Page 2 of 2