PM963 2020 Kicks






|

PM963 | Original Document
PM963- 2020 KICKS/VERSA
CVT REPLACEMENT
SERVICE PROCEDURE:
NOTE: It is NOT necessary to contact Powertrain Call Center (PCC) for approval. A
VCAN is not required.
For KICKS:
1. Replace the CVT Assembly per the ESM: TRANSMISSION & DRIVELINE > CVT:
RE0F11B > UNIT REMOVAL AND INSTALLATION, TRANSMISSION ASSEMBLY >
Removal and Installation.
2. Also follow Inspection & Adjustment Before and After Installation ESM:
TRANSMISSION & DRIVELINE > TRANSAXLE & TRANSMISION > CVT: RE0F11B >
UNIT REMOVAL AND INSTALLATION, TRANSMISSION ASSEMBLY > Inspection and
Adjustment.

Using the ESM procedure, follow all Warnings, Cautions, Notes and Torque
requirements during the Removal and Installation procedure.
WARNING: Do not remove the coolant reservoir tank cap when the engine is hot.
Serious burns could occur from high pressure engine coolant escaping from the
reservoir tank. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
 Perform these steps after the coolant temperature has cooled sufficiently.
 When replacing transaxle assembly, perform “ADDITIONAL SERVICE WHEN
REPLACING TRANSAXLE ASSEMBLY”.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug
openings to prevent fluid from spilling.
*These CVTs will be placed on parts return back to the Field Quality Center.
Please direct the parts attention to “FQA” while following the standard
campaign parts return process.
1/4
For VERSA:
1. Replace the CVT Assembly per the ESM: TRANSMISSION & DRIVELINE >
TRANSAXLE & TRANSMISSION > CVT: RE0F11B > UNIT REMOVAL AND
INSTALLATION, TRANSMISSION ASSEMBLY > Removal and Installation.
2. Also follow Inspection & Adjustment Before and After Installation ESM:
TRANSMISSION & DRIVELINE > TRANSAXLE & TRANSMISION > CVT: RE0F11B
> UNIT REMOVAL AND INSTALLATION, TRANSMISSION ASSEMBLY > Inspection
and Adjustment.
 Using the ESM procedure, follow all Warnings, Cautions, Notes and
Torque requirements during the Removal and Installation procedure.
WARNING: Do not remove the coolant reservoir tank cap when the engine is hot.
Serious burns could occur from high pressure engine coolant escaping from the
reservoir tank. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
 Perform these steps after the coolant temperature has cooled sufficiently.
 When replacing transaxle assembly, perform “ADDITIONAL SERVICE WHEN
REPLACING TRANSAXLE ASSEMBLY”.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug
openings to prevent fluid from spilling.
*These CVTs will be placed on parts return back to the Field Quality Center.
Please direct the parts attention to “FQA” while following the standard
campaign parts return process.
2/4
PARTS INFORMATION:
Description
Part #
Quantity
AUTOMATIC TRANSAXLE
31020-50X5A
1
NUT
01223-00231
4
NUT
01225-N0011
2
NUT
01225-N2011
2
WASHER DRAIN
11026-JA00A
1
GASKET-INTAKE MANIFOLD
14035-5RL0A
1
GASKET-INTAKE MANIFOLD
16175-5RB0A
1
CLAMP
16439-7S01E
2
NUT-FIX, EXHAUST TUBE
20602-9U20B
2
GASKET-EXHAUST
20691-19B0A
1
GASKET-EXHAUST
20692-1HA0A
1
SEAL-O RING
31084-3Z000
1
PIN-COTTER
40073-0L700
2
NUT-LOCK, FRONT WHEEL B
40262-4M400
2
NUT
54588-1HA0C
4
NS-3 CVT FLUID
999MPCV0NS3
12
NISSAN LONG LIFE
COOLANT BLUE
999MPL25500P
3
3/4
CLAIMS INFORMATION
Submit claim using the following claims coding:
Work Order Line Type: “CM” Campaign
Campaign: PM963
Claim Type:
CM
PNC:
PM963
Symptom:
ZZ
Diagnosis:
99
Op
Codes
Flat
Rate
Time
Parts
Required
on claim
Expense
Code
Required
Replace CVT Assembly (Versa)
PM9630
7.5 Hr
Yes
NO
Replace CVT Assembly (KICKS)
PM9631
7.3 Hr
YES
NO
Description:
4/4