NTB16-103c
Service Bulletin Details
Public Details for: NTB16-103c
2014 a?? 2020 frontier; manual seat track adjustment does not lock into position this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2019
2019 NISSAN FRONTIER |
Models from 2018
2018 NISSAN FRONTIER |
Models from 2017
2017 NISSAN FRONTIER |
Models from 2016
2016 NISSAN FRONTIER |
Models from 2015
2015 NISSAN FRONTIER |
Models from 2014
2014 NISSAN FRONTIER |
Classification: Reference: BT16-021c Date: NTB16-103c December 17, 2020 2014 – 2020 FRONTIER; MANUAL SEAT TRACK ADJUSTMENT DOES NOT LOCK INTO POSITION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. APPLIED VEHICLE: 2014 – 2020 Frontier (D40) - equipped with manual front seat IF YOU CONFIRM The seat track latching pawls for a front seat (left or right) are not synchronized. The inboard track latches, but the outboard track does not latch unless the seat is pushed/pulled into position. NOTE: The customer may report the following if this issue should occur: The seat track seems loose when braking or accelerating. The seat track is difficult to lock in place. After adjusting the seat track, it shifts/locks into place while driving. ACTION Adjust/synchronize the outboard seat track per the SERVICE PROCEDURE in this bulletin. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/4 SERVICE PROCEDURE NOTE: The driver seat is shown in Figures 1-3; the passenger seat is similar. 1. Remove the leg cover from the outboard seat track. Leg cover Figure 1 2. Loosen, don’t remove, the outboard seat track mounting bolts. Loosen bolt Loosen bolt Figure 2 2/4 NTB16-103c 3. Adjust the seat and outboard track as needed to ensure track adjustment pawls are synchronized (they lock at the same time on both sides). Tap the outboard seat track forward or backward as needed. By hand, move the seat cushion as needed. Adjust / Move Tap Tap Figure 3 4. Once the seat tracks are synchronized, tighten the seat track mounting bolts. Torque bolts to: 45 N•m (4.6 kg-m, 33 ft-lb) 5. Re-install the leg cover. 3/4 NTB16-103c CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: DESCRIPTION PFP OP CODE SYM DIA FRT Adjust Manual Seat Track(1) VX4TAA ZE 32 0.2 One or Both (1) Refer to the Electronic Parts Catalog and use the appropriate Seat Adjuster Assembly part number (87450-*****) as the primary failed part. AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION October 31, 2016 NTB16-103 Original bulletin published November 17, 2017 NTB16-103a APPLIED VEHICLES section revised February 22, 2019 NTB16-103b APPLIED VEHICLES section revised December 17, 2020 NTB16-103c APPLIED VEHICLES section revised 4/4 NTB16-103c