S7554

Service Campaign S7554
January 18, 2021
Road Speed Limit Default Setting
Service Category Electronic Engine Control Unit
Section Conversion Kit
Technician Skill Level A
Applicability
VOLVO
Years
2020 - 2021
Market North America
Models
VN, VHD, VAH
Introduction
On certain Volvo VN, VHD, or VAH model Vehicles built between November, 2020 and January
2021 the default variant was programed for Road Speed Limit in Low Gears and High Gear Ratio
End Speed Governor, regardless of which variant the customer ordered. To correct this condition
a Conversion Kit needs to be ran on the vehicle as well as Reprograming the Engine Control
Module (ECM) and Aftertreatment Control Module (ACM).
Production Change Information
This bulletin applies to vehicles built within the specified production changes below.
Brand
Engine
Emission Level
Starting Build Date
Ending Build Date
EOBD
20
21
30-November-2020
03-January-2021
Volvo
All
Service Campaign S7554
January 18, 2021
Road Speed Limit Default Setting
Warranty Information
This repair may be eligible for reimbursement if a product failure was
experienced with in time and mileage limits of the applicable Warranty coverage.
Reimbursement is obtained via the normal claim handling process.
Claim Type (used only when uploading from the Dealer Bus. Sys.)
B
Main Labor Code
Description
1700-22-03-06
Conversion Kit, Programming
0.1
2841-22-02-01
ECM and ACM, Reprogramming
0.4
Causal Part
SCC Authorization
Code
Expiration Date
Hours
3092091
S7554
January 31, 2022
Parts Information
N/A
Required Tools & Equipment
•
•
•
•
Premium Tech Tool (PTT) with latest version
Vocom (one of the following 16 Pin cables) 88890304, 88890253, or 88894001
Vocom Communication Interface 88890300, or 88894000
Vocom USB Cable 88890313
Calibration Information
•
Conversion Kit: 85153082
Repair Procedure
1. Using Tech Tool Operation 1700-22-03-06, Program Conversion Kit: 85153082.
2. Reprogram the ECM & ACM, 2841-22-02-01.