REVISION 1 - P0A
Service Bulletin Details
Public Details for: REVISION 1 - P0A
Final all wheel drive clutch break-in update january 22, 2021 please discard earlier versions of this bulletin. The announcement from november 24, 2020 has been revised to include: - additional affected vehicles have been identified
- 2021 -
Models from 2021
2021 NISSAN ROGUE |
| P0A33 | REVISION 1 P0A33 – 2021 ROGUE FINAL DRIVE BREAK-IN SERVICE PROCEDURE: Caution: Read this entire procedure prior to performing. Make sure this procedure is performed in a parking lot with no pedestrians, obstacles or other vehicles present. 1. Verify both the extended storage switch and the BCM transit mode have been disabled. 2. Ensure the vehicle is at ambient temperature. If the vehicle is above ambient temperature, allow the vehicle to sit for at least 30 minutes before proceeding. 3. Verify the AWD selector is in AUTO mode. (Figure 1) AUTO Mode Figure 1 4. Drive sixteen (16) figure-8 patterns in a parking lot. The vehicle MUST maintain a constant speed of 10mph. The steering angle MUST be at full lock. NOTE: While performing the drive pattern there may be a vibration feeling that should reduce with each circuit as the AWD clutch breaks-in. 5. If the vibration is not resolved after performing Step 4, repeat Step 4. Step 4 can be performed a maximum of 3 times. NOTE: If vibration is still present after performing this procedure, use the ESM for further diagnosis. Page 1 of 2 CLAIMS INFORMATION Submit claim using the following claims coding: Work Order Line Type: “CM” Campaign Campaign: P0A33 Claim Type: CM PNC: P0A33 Symptom: ZZ Diagnosis: 99 Description: Op Codes Flat Rate Time Parts Required on Claim Expense Code Required Perform Figure-8 Drive Pattern P0A330 0.4 Hr NO NO Page 2 of 2