TSB210004-010620
Service Bulletin Details
Public Details for: TSB210004-010620
This technical service bulletin describes the verification and resolution of additional instances of engine misfire fault codes 5895, 5896, 5897, 5898, 5899, 5911, or 5914 caused by increased sensitivity of the misfire diagnostics.
- 9999 -
Models from 9999
9999 CUMMINS L9 |
2/1/2021 Full Range Misfire Detection Technical Service Bulletin Technical Service Bulletin: TSB210004 Full Range Misfire Detection Released Date: 06-Jan-2021 Full Range Misfire Detection Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Contents Product Affected L9 CM2450 L126B Issue A new full range misfire feature has been introduced. This feature allows the engine to detect injector misfire across the entire operating range of the engine. Symptom Additional instances of Fault Codes 5895, 5896, 5897, 5898, 5899, 5911, or 5914 caused by increased sensitivity of the misfire diagnostics. Verification If there are active or inactive counts of Fault Codes 5895, 5896, 5897, 5898, 5899, 5911, or 5914. Resolution Follow published troubleshooting. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210004.html 1/2 2/1/2021 Full Range Misfire Detection If any injectors are removed or replaced during the repair, verify that the complete Fuel Injector Reset is properly performed. See L9 CM2450 L126B Service Manual, Bulletin 5613077. Refer to Procedure 006-026 in Section 6. (/qs3/pubsys2/xml/en/procedures/583/583-006-026.html) Document History Date 2021-1-5 Details Module Created Last Modified: 06-Jan-2021 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210004.html 2/2