PIP5733G
Service Bulletin Details
Public Details for: PIP5733G
This preliminary information communicatespossible crank no start or extended crank with dtc P12A6 set current or history.Under investigation
Models from 2021
2021 CHEVROLET EQUINOX |
2021 CHEVROLET MALIBU |
2021 CHEVROLET SILVERADO 1500 |
2021 CHEVROLET SILVERADO 2500 |
2021 GMC SIERRA 1500 |
2021 GMC SIERRA 2500 |
2021 GMC TERRAIN |
Models from 2020
2020 CADILLAC ESCALADE |
2020 CHEVROLET CORVETTE |
2020 CHEVROLET EQUINOX |
2020 CHEVROLET MALIBU |
2020 CHEVROLET SUBURBAN |
2020 CHEVROLET TAHOE |
2020 GMC TERRAIN |
2020 GMC YUKON |
Models from 2019
2019 CHEVROLET SILVERADO 1500 |
2019 GMC SIERRA 1500 |
Bulletin No.: PIP5733G Published date: 12/18/2020 Preliminary Information PIP5733G Possible Crank No Start or Extended Crank With DTC P12A6 Set As Current or History Models Brand: Model: Model Years: VIN: from Engine: to Transmissions: Cadillac Escalade 2020 All All 6.2 L86 L87 All Chevrolet Corvette 2020 All All 6.2L LT2 All Chevrolet Equinox 2020 - 2021 All All 1.5 LYX All Chevrolet Malibu 2020 - 2021 All All 1.5 LFV All Chevrolet Silverado 1500 (New Model) 2019, 2021 All All 4.3 LV3 5.3 L82/L84 6.2 L87 All Chevrolet Silverado 2500/3500 2021 All All 6.6 L8T All Chevrolet Suburban 2020 All All 5.3 L83 L84 6.2 L86 L87 All Chevrolet Tahoe 2020 All All 5.3 L83 L84 6.2 L86 L87 All GMC Sierra 1500 2019, 2021 All All 4.3 LV3 5.3 L82/L84 6.2 L87 All GMC Sierra 2500/3500 2021 All All 6.6 L8T All GMC Yukon 2020 All All 5.3 L83 L84 6.2 L86 L87 All GMC Terrain 2020 - 2021 All All 1.5 LYX All Involved Region or Country North America Condition Possible Crank no start or extended crank with DTC p12A6 set current or history. Cause Internal Hardware Issue Correction: Replace the K20 Engine Control Module (ECM). Engineering is aware of this concern, this PI will be updated to a bulletin when the permanent x is released. Warranty Information For vehicles repaired under the Emissions (E,E2) coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation Description Labor Time 4087548 K20 Engine Control Module Replacement (ECM) 5.3 L83 and 6.2 L86 2020 SUV Base Time: 0.5 Hr. Diagnostic Add Time 0.0 - 1.0 Hrs. 1.5 LYX 2020-2021 Base Time: 0.6 Hr. Diagnostic Add Time 0.0 - 1.0 Hrs. 1.5 LFV 2020-2021 Base Time: 0.6 Hr. Diagnostic Add Time 0.0 - 1.0 Hrs. To relearn O AT Sensor: add 0. 2 Hrs. 4.3 LV3, 5.3 L82/L84 and 6.2 L87 2019, 2021 Base Time: 0.8 Hrs. Diagnostic Add Time 0.0 - 1.0 Hrs. 6.2L LT2 2020 Corvette: Base time is ST 2.0L LSY Engine CT5 Base time is 1.0 Hrs. Diagnostic Add time 0.0 – 1 Hrs. 6.6 L8T 2021 Base Time: 1.1 Hrs. Diagnostic Add Time 0.0 - 1.0 Hrs. *This is a unique Labor Operation for Bulletin use only . Version History Version Modi ed 6 06/11/2020 - Created on. 07/29/2020 - Updated Model Years. 08/06/2020 - Updated Model Years and Engine RPO Codes. 08/27/2020 - Updated the labor operation. 09/21/2020 - Updated to remove Cadillac CT5. 10/05/2020 - Updated to edit labor op. 11/17/2020 - Update to remove 2021 T1UX vehicles. 12/07/2020 - Update to remove 2020 T1XX vehicles. © 2021 General Motors. All Rights Reserved.