ITB18-040d

Classification:
Reference:
Date:
AN18-023d
ITB18-040d
February 10, 2021
SOFTWARE UPDATES FOR INFOTAINMENT ISSUES
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Discard all previous versions of this bulletin.
APPLIED VEHICLES: 2016-2018 Q50 (V37)
2016-2018 Q50 Hybrid (V37)
2017-2018 Q60 (V37)
2018 Q70 (Y51)
2018 Q70 Hybrid (Y51)
2017-2018 QX30 (H15)
2017-2018 QX60 (L50)
2017-2018 QX60 Hybrid (L50)
2018 QX80 (Z62)
IF YOU CONFIRM
Any one or a combination of the following on an applied vehicle:





Reverse camera is blank (vehicles manufactured before May 1, 2018)
Reverse camera remains ON when in Drive (vehicles manufactured before May 1, 2018)
Average fuel economy displays 99.9 MPG
Display screen flickers at higher ambient interior temperatures
SXM Info Apps (Weather, Stocks, Fuel Prices) inoperative
ACTION
1. To confirm an update applies to the Display Control Unit (DCU) of the vehicle being worked on, you MUST
refer to page 4, step 8, AND page 14, Figure 19 in the SERVICE PROCEDURE.
IMPORTANT: Confirmation is determined by performing the following two steps.
1. Comparing the DCU part number with those listed in Table A on page 5,
AND
2. Verifying new software is required as shown on page 14, Figure 19.
2. If this bulletin applies, update the DCU software.
 See REQUIRED SPECIAL TOOL on page 2.
NOTE: The updated software resolves the items above along with improving software stability.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing.
You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to
successfully completing this repair.
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/16
REQUIRED SPECIAL TOOL



One of special tool USB drive J-52727 has been shipped to each dealer (see Figure 1).
Do not use any other USB drive to perform the procedure in this bulletin.
Additional USB drives may be purchased from Tech•Mate (1-800-662-2001).
Figure 1
SERVICE PROCEDURE
Check the DCU (P/N)
IMPORTANT: Before starting, make sure:
 ASIST is connected to the Internet.

1.
2.
3.
4.
ASIST on the CONSULT PC has been synchronized (updated) to the current date.
Connect the CONSULT PC and plus VI to the vehicle.
Start CONSULT-III plus (C-III plus).
Turn ON the ignition.
Wait for the plus VI to be recognized / connected.

The serial number will display when the plus VI is recognized / connected.
5. Select Diagnosis (One System).
Figure 2
2/16
ITB18-040d
6. Select MULTI AV.
Figure 3
3/16
ITB18-040d
7. Select the ECU Identification tab.
8. When the screen in Figure 4 displays, confirm this bulletin applies as follows:
a. Write down the ECU PART NUMBER on the repair order.
NOTE: This is the current DCU part number (P/N).
XXXXX
XXXXXXXX
Figure 4
b. Compare the P/N written down to the P/Ns in the CURRENT DCU PART NUMBER column in
Table A on the next page.

If there is a match, proceed to step 9 on page 6.

If there is not a match, DCU updating does not apply. Refer to ASIST for further diagnosis.
4/16
ITB18-040d
Table A
MODEL
MODEL YEAR
2016
Q50
and
Q50 Hybrid
CURRENT DCU PART NUMBER: 283874HK0A, 4HK2A
4HK0C, 4HK2C
4HK0D, 4HK2D
2017
4HK1A, 4HK3A
4HK4A, 4HK5A
2018
4HK4B, 4HK5B
4HK0B, 4HK2B
2017
4HK1A, 4HK3A
Q60
4HK4A, 4HK5A
2018
4HK4B, 4HK5B
6GY01, 6GY1A
Q70
and
Q70 Hybrid
QX30
6GY0B, 6GY1B
2018
5ZA0D
2017
2018
QX60
and
QX60 Hybrid
6GY0E, 6GY1E
9PB0E
4DL0A, 4DL1A, 4DL2A, 4DL3A, 4DL6A,
4DL7A
4DL4A, 4DL5A, 4DL8A, 4DL9A
5ZA0A, 5ZA0B
2017
9PB0A, 9PB0D
6GY0A, 6GY0B, 6GY0E
2018
6GY1A, 6GY1B, 6GY1E
6GY0A, 6GY0B, 6GY0E
QX80
6GY1A, 6GY1B, 6GY1E
2018
5ZA0D
9PB0E
5/16
ITB18-040d
Update the Display Control Unit
IMPORTANT: Before starting, make sure:

ASIST is connected to the Internet.

ASIST has been synchronized (updated) to the current date.
9. Insert special tool USB drive J-52727 to an ASIST Station.
HINT: Special tool USB drive J-52727 is the only one approved for use with this procedure.
10. Open ASIST.
11. Select Specialty Tools, and then select Infotainment Software Updates.
Specialty Tools
Infotainment Software Updates
Figure 5
6/16
ITB18-040d
12. Select the check box next to the correct update software package based on Table B below (see Figure 6).
HINT: Use the scroll bar, if needed, to find the correct update software package.
Failure to select the correct update software package may result in needing to replace the DCU.
HINT: Replacement of an incorrectly updated DCU is not covered under warranty.
Table B
*
MODEL
AUDIO SYSTEM
DESCRIPTION
2017-2018 QX60,
2017-2018 QX60 Hybrid,
2018 Q70, 2018 Q70 Hybrid,
and
2018 QX80
CD capable *
IT5001
2017-2018 QX60,
2017-2018 QX60 Hybrid,
and
2018 QX80
Rear Entertainment system
with CD and DVD capability *
IT5002
2016-2018 Q50,
2016-2018 Q50 Hybrid,
and
2017-2018 Q60
CD capable
IT5003
2017-2018 QX30
CD capable *
IT5005
If you are unsure which audio system the vehicle is equipped with, insert a DVD into the instrument panel
mounted AV control unit. With CD only audio systems, an error message will display on the screen. In
CD/DVD capable systems, the DVD will work.
13. Use the drop-down menu and select the location of the USB drive that was inserted in step 9.
HINT: The Description section in Figure 6 may show differently than your C-III plus screen.
Check
box
Drop-down menu
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
Infotainment
software
updates
XXXX
USB drive
location
XXXXXXXXX
XXXXX
Scroll
bar
XXXXXXXX
Figure 6
14. Select Download, and then wait for the download to complete.
7/16
ITB18-040d
15. Select OK.
E:\ Copy Process Completed
Figure 7
16. Once the transfer is complete, safely remove the USB drive from the ASIST Station.
a. From the PC toolbar, select the Safely Remove Hardware icon.

The icon is on the toolbar, or to be found after selecting the arrow.
b. Select the USB drive to be removed, and then remove the USB drive from the ASIST Station.
Follow the steps to safely remove the USB drive. If not followed, the USB drive may corrupt the
infotainment update software.

If you are not familiar with the process of safe USB drive removal, ask for assistance at your
dealer.
Safely Remove
Hardware icon
USB Drive (E:)
Arrow on toolbar
Figure 8
17. Close all ASIST Infotainment Software Update screens.
18. Start the engine, and then wait 60 seconds for the system to load.
HINT: The engine needs to idle for the duration of the update to retain battery charge.
8/16
ITB18-040d
19. Open the Settings Menu, and then select Bluetooth.

The Settings menu is accessed with the hard button located under the display.
Figure 9
20. Select Connect Device from the Bluetooth Settings menu.
HINT: If no connected devices are present, Figure 16 (page 12) will display.
Figure 10
9/16
ITB18-040d
21. Check for devices in the Device List:

YES, one or more devices are listed: Select a device, and then proceed to step 22.

NO, there are no listed devices: Skip to step 24.
IMPORTANT: All paired (listed) devices must be deleted before proceeding to step 24.
Figure 11
22. Select Delete and confirm the screens in Figure 13 and then Figure 14 are displayed.
Figure 12
10/16
ITB18-040d
HINT: The following screens will be displayed while a paired device is being deleted.

The first screen will show “Deleting…” followed by the device name.
Figure 13

The second screen will show information regarding repairing the Bluetooth® device.
Figure 14
11/16
ITB18-040d
23. Check for additional devices in the Device List:

YES, there are more listed devices: Perform steps 21 and 22 until all listed devices are deleted.

NO, there are no listed devices: Proceed to step 24.
IMPORTANT: All paired (listed) devices must be deleted before proceeding to step 24.
Example of one
device present
Figure 15

Figure 16 will be displayed when all listed devices have been deleted.
Example of no
devices present
Figure 16
12/16
ITB18-040d
24. Insert the USB drive with infotainment update software into the vehicle’s USB media port (see Figure 17).

Do not remove the USB drive during the update to the vehicle until instructed.
HINT: Charging ports are marked in the vehicle with a “lightning bolt” symbol.
Do not insert the USB drive into a charging port. If used, the update software and/or USB drive may
become damaged. Only insert the USB drive in a USB media port.
USB media
port symbol
DO NOT USE
USB ports with a
“Lightning bolt”!
Figure 17
Figure 18
13/16
ITB18-040d
25. Wait approximately 10-30 seconds for the screen in Figure 19 or Figure 20 to appear.

If the screen shown in Figure 19 appears, proceed to step 26 below.

If the screen shown in Figure 20 appears, then no software update is available. Refer to
ASIST for further diagnostic information.
Figure 19
Figure 20
26. Select Yes to begin the software update.
14/16
ITB18-040d
27. Wait for the update to complete.

Follow the on-screen instructions while waiting.
HINT: The update lasts 10-70 minutes.
Figure 21
28. Once the update is complete, remove the USB drive, and then select Restart.
Figure 22
15/16
ITB18-040d
Steps 29-32 must be completed. If they are not completed, the update may become corrupted.
29. Allow the reboot to complete (2-5 minutes after selecting Restart).
30. Once the reboot has completed, turn OFF the engine, and then wait three (3) minutes.
31. Start the engine and allow the vehicle to run for two (2) minutes.
32. Turn OFF the engine.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Perform Software Update
(1)
RX6SAA
ZE
32
0.5
(1) Reference the Electronic Parts Catalog (EPC), and use the Display Control Assy (28387-*****) as the
Primary Failed Part (PFP).
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
DESCRIPTION
December 2, 2018
ITB18-040
Original bulletin published
December 19, 2018
ITB18-040a
Amended to add Bluetooth® device deletion procedure
March 19, 2019
ITB18-040b
Added part numbers to Table A, added Figure 20, and
modified the ACTION statement on page 1
September 6, 2019
ITB18-040c
SERVICE PROCEDURE amended throughout
February 10, 2021
ITB18-040d
Classification number updated
16/16
ITB18-040d