SB18-L-002B
Service Bulletin Details
Public Details for: SB18-L-002B
Some customers may experience an illuminated malfunction indicator light (mil) with dtc P20EE diesel exhaust flued (def) system nox trap low efficiency set without an apparent cause. New calibrations for the def control unit (dcu) have bee
Models from 2019
2019 ISUZU N-SERIES |
Models from 2018
2018 ISUZU N-SERIES |
Models from 2017
2017 ISUZU N-SERIES |
Models from 2016
2016 ISUZU N-SERIES |
BULLETIN NUMBER: SB18-L-002B IMPORTANT SERVICE INFORMATION FOR: SERVICE MANAGER SERVICE ADVISOR TECHNICIAN PARTS DEPARTMENT WARRANTY PERSONNEL ISSUE DATE: FEBRUARY 2021 GROUP: MISCELLANEOUS DTC P20EE DEF CONTROL UNIT RECALIBRATION AFFECTED VEHICLES 2016 – 2019MY Isuzu N-Series Equipped with 5.2L 4HK1 Diesel Engines This bulletin supersedes service bulletin SB18-L-002A. This bulletin is being revised to update available calibrations. Please discard previous bulletin SB18-L002A. CONDITION Some customers may experience an illuminated Malfunction Indicator Light (MIL) with DTC P20EE Diesel Exhaust Fluid (DEF) System NOx Trap Low Efficiency set without an apparent cause. New calibrations for the DEF Control Unit (DCU) have been developed to address this concern. Follow the diagnostic for this DTC. If no fault can be found when performing the normal diagnosis, follow the service procedure in this bulletin to reprogram the DEF Control Module. SERVICE PROCEDURE Reprogram the DCU with the latest software and calibration using the Isuzu Diagnostic Service System (IDSS) if the calibration part number does NOT match the calibration number listed in the table below: MY 2016 2017 2018 2019 Vehicle N-Series N-Series N-Series N-Series Engine 5.2L 5.2L 5.2L 5.2L Trans AUTO AUTO AUTO AUTO Calibration # 98320685 97536099 97536100 97536101 NOTE: If the calibration number IS listed above, follow the Intermittent Conditions diagnostics in the appropriate Workshop Manual. WARRANTY INFORMATION For vehicles repaired under warranty, use: Labor Operation Code L4012 Description DTC P20EE DCU Recalibration Labor Time 0.4