22DETAILREP325

2022
All Vehicles
Audi Vehicle Detail Report
Stock No.
Dealer Number
VIN
Model
R.O. No.
Reminders

WARNING: DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery.
Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials.

WARNING: Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 Spyder,
TT Roadster ONLY)

WARNING: DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5
minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 Spyder, TT Roadster ONLY)

WARNING: DO NOT treat vehicle parts painted with matte finish paint with conventional polishing materials or hard wax.
Specific matte paint care products can be found in the Touch Up Paint and Service Supplies eStore in Access Audi. Use of
conventional polishes and waxes can destroy the matte finish effect.
Exterior – Prior to Delivery
Interior – Prior to Delivery
 Remove protective covering
 Clean all glass/sunroof (if equipped/interior rear view mirror
and visor mirrors)
 Wash/Dry vehicle exterior including inside door jambs and
under trunk
 Inspect painted surfaces/molding/glass and remove any
residue
 Inspect body for paint defects and damage. Repair any damage before delivery to the customer
 Remove all trim protection/coverings/stickers/decals
WARNING! Do not remove airbag warning triangle/warning
labels
 Check upholstery/clean as required
 Check for excessive grease on seat tracks/clean as required
 Check interior floors, sunroof, trunk, front and rear windshield, and all windows for water leaks
 Check all interior surfaces/compartments (including sun visors/headliner) for marks or fingerprints. Clean as required
 Apply either 3M™ Premium Liquid Wax or 3M™ Perfect-It™
Show Car Paste Wax to wax the vehicle (excluding vehicles
painted with a matte paint finish).
 Vacuum carpet
 Clean front and rear windshield using 3MTM Glass Polishing
Compound. Refer to TSB 2020552 for details
 Apply 3M™ Premium Liquid Wax to the wheels (except
chrome wheels) to protect rims from brake dust.
 Ensure tire pressure is set to Normal Load Condition prior to
delivery. SEE/PRINT TABLE FROM SERVICENET.
Under Hood – Prior to Delivery
WARNING: DO NOT TOUCH ORANGE HIGH VOLTAGE WIRES
(Q5 TFSI e A7 TFSI e, A8 TFSI e, e-tron vehicles only)
 Wipe down area under the hood and remove excess water
from grille and hood area.
IMPORTANT: DO NOT use dressings or chemicals containing silicone!
 Check luggage compartment and vacuum
 Install front/rear floor mats (including locking clip/tabs if
applicable)/check that color matches
Final Detail Quality Inspection
 Re-inspect vehicle for surface scratches, swirl marks, paint
chips, dents, wax residue, dust, or lint, preferably in an
area where vehicle is to be delivered. If this is not possible,
inspect vehicle in shop under fluorescent lights or in bright
sunlight. Repair any damage before delivery to the customer
Detailer
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery.
Detailer Signature
Effective 3-25-2021-US
Version 1.0
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 1