22etronTECHREP

2022
e-tron/Sportback/GT
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi-approved battery charger to replenish the high voltage battery during inspection
 Guided Fault Finding must be used, session must be completed and sent to GFF Paperless
 Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test)
 Start Guided Fault Finding in Drive Readiness mode to ensure control modules in transport mode are identified
 Before using ODIS, remove any high voltage charger, no AC or DC is allowed. Maintain the 12V battery as usual
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection
 Check Elsa for open campaigns and updates
 Verify trunk is operational
 Verify Audi phone box customer registration form is present
in vehicle and add the serial number, FCC ID, and Model
from Elsa (if equipped). See TSB 2051720
 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Perform any open campaigns*
 Perform diagnostic work*
 Install front license plate carrier (if necessary)*
Interior
 Check operation of window, lock, and seat controls*
Exterior
 Move front passenger seat belt retainer to highest position
while sitting against the b-pillar
 Check all key buttons and features*
 Inspect mirrors for proper operation*
 Check all doors for proper power closing*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Verify operation of heated/ventilated and massaging seats
(front/rear) (if equipped)*
Lighting and Windshield
 Verify operation of manual folding 2nd row
 Test exterior lighting functions
 Verify proper operation of climate control*
 Test windshield washers (and headlight washers). Correct
aim if necessary*
 Inspect operation of all power outlets*
Underhood Inspection
 Remove protective packing and inspect charging components
 Verify tool kit is installed securely in storage compartment
 Check panoramic sunroof and sunshade operation (if
equipped)*
 Verify operation of rear side sunshade operation
 Verify operation of front Passenger Occupant Detection
System
 Fill windshield washer fluid
Settings
 Check all fluid levels and top off if necessary
 Verify operation of MMI® touch screens, upper and lower
Effective 3-25-2021-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2022
e-tron/Sportback/GT
Audi Pre-Delivery Inspection
Settings (continued)
Driver Assistance
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Verify all cruise control functions
 Verify and set language and measurement units*
 Verify cruise control/ACC (if equipped), which includes the
following:
 Verify Speech Dialog System is operating*
 Adaptive Cruise Assist
 Set “Music volume while parking” to medium*
 Turn Assist
 Set dealership location in navigation*
 Intersection Assistant
 Turn off Manual Speed Warning (if equipped)*
 Traffic Jam Assist
 Disable climate control via door unlock*
 Predictive Efficiency Assist
 Active lane assist with emergency assistant
Media / Radio / SAT
 Insert SD card and test function of all slots
 Traffic sign recognition
 Program the presets to local stations
 Verify Audi side assist functionality Pre sense® rear (if
equipped
 Verify HD Radio is turned “off”*
 Verify operation of parking system*
 Confirm SiriusXM is on and in an active state (can scroll
through channels and hear music)
 Activate rear cross traffic assist (if equipped)
On-Hoist Inspection
 Check underside of vehicle for fluid leaks and loose components
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Verify all vehicle Head-up display functionality (if equipped)*
 Verify operation of High-beam assist
 Activate NAV and follow directions back to dealership
Post-Road Test Inspection
 Verify SOS button is green and Roadside assistance button
LED will remain off
 It may take up to 20 minutes for the emergency call system to activate (LED turns green) after flight/transport
mode deactivation
 The vehicle must not be delivered to the customer if the
emergency call function has not been successfully activated (LED lights up in green)
 Check horn operation
 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
 Verify hold and release of electronic parking brake
 Check service interval and verify correct interval is displayed
 Verify electric motor performance and acceleration*
 Verify regen operation, including steering wheel paddles
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Test drive vehicle applying brakes several times*
 Apply 30 Day Inventory Maintenance Sticker**
 Check adaptive air suspension in all positions
 Plug vehicle into a charger to ensure HV Battery is 100%
charged before delivering vehicle to customer - Level 2 recommended based on speed of charge
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Calibrate rear view mirror*
 Verify quality of radio reception in FM/SiriusXM® bands
Effective 3-25-2021-US
Version 1.1
 Ensure enough time is allotted for battery to reach 100%
charge by the scheduled delivery appointment. Charging
over 80% is not recommended if the car will be parked
for more than 12 hours. This is to prevent premature aging of the battery
 Install showroom trickle charger to ensure the 12V battery
remains charged at all times**
PRE-DELIVERY INSPECTION (PDI) | 2
2022
e-tron/Sportback/GT
Audi Pre-Delivery Inspection
Audi connect® (USA ONLY)
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI due to
dealer demo mode*
 Enable satellite map view for navigation*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 3-25-2021-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3
Audi Phone Box-Equipped Vehicles
Operation of the Audi Phone Box is subject to the following requirements of the Federal
Communications Commission:
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your
wireless provider and have your provider’s consent. Most
wireless providers consent to the use of signal boosters. Some
providers may not consent to the use of this device on their
network. If you are unsure, contact your service provider.
You MUST operate this device with approved antennas and
cables as specified by the manufacturer. Antennas MUST be
installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested
by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or
may be inaccurate for calls served by using this device.
Make #
FKW
Model #
Serial #
FKW -
FCC ID
CUSTOMER COPY
This Signal Booster fulfills the FCC requirements for the Network Protection
Starndard (NPS). It incorporates features to prevent harmful interference to
wireless networks like:
• Anti-oscillation to detect and mitigate any unintended oscillations in
uplink and downlink frequency bands,
• Adaptive gain control with self-monitoring and to power down
automatically as approaching any affected base station,
• Uplink Inactivity to shut down the transmit amplifiers if not serving
an active device connection.
This Signal Booster includes features to prevent harmful interference. These
features are enabled and operating at all times the signal booster is in use,
they may not be deactivated by the operator.
CUSTOMER COPY