21-BR-001H
Service Bulletin Details
Public Details for: 21-BR-001H
This bulletin provides a front brake pad backing plate grease application procedure to address squealing during braking.
Models from 2021
2021 HYUNDAI KONA |
Models from 2020
2020 HYUNDAI KONA |
GROUP NUMBER BRAKES DATE Technical Service Bulletin 21-BR-001H MODEL(S) MARCH 2021 Kona (OS) FRONT BRAKE PAD BACKING PLATE GREASE APPLICATION SUBJECT: Description: This bulletin provides a front brake pad backing plate grease application procedure to address squealing during braking. Applicable Vehicles: All gasoline powered Kona (OS) vehicles produced from Start Of Production (SOP) to September 17, 2020. Warranty Information: MODEL Kona (OS) OP CODE OPERATION OP TIME CAUSAL PART NATURE CODE CAUSE CODE 58000F00 FRONT BRAKE PAD GREASE APPLICATION 0.5 M/H 58101* Q42 ZZ1 *Refer to the applicable parts catalog for full causal part numbers. NOTE 1: Please submit $1.00 in sublet for reimbursement of grease. Parts Required: NAME PART NUMBER Brake Anti-Squeal Grease 581G0-J9050FFF PHOTO REMARK 1 tube for approximately 7 vehicles Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair FRONT BRAKE PAD BACKING PLATE GREASE APPLICATION SUBJECT: Service Procedure: Refer to the link for brake squeal noise. https://youtu.be/aKo9ZR54V3o 1. Remove the brake pad according to the vehicle shop manual. Brake System > Brake System > Front Disc Brake NOTICE Do not remove the disc nor caliper carrier. Reuse the return spring, pad retainer, and shims. 2. Apply a thin layer of grease on the edges of the inner and outer brake pad backing plate as shown on the reference diagram. Each pad should receive 0.250 grams (0.009 ounces) of grease or 0.125 grams per edge (approximately 1 gram per vehicle). ! ! CAUTION Prevent grease from touching the disc or pad friction material. . Use brake cleaner to remove errant grease. 3. Perform this procedure on the other side of the vehicle. 4. Reinstall all removed parts in reverse order of removal. 5. Tighten all bolts to the torque specification recommended in the appropriate vehicle shop manual. 6. The service procedure is now complete. TSB #: 21-BR-001H Page 2 of 2 SUBJECT: