A0121022058038_3
Service Bulletin Details
Public Details for: A0121022058038_3
This informational bulletin contains instructions for creating a pss record.
- 9999 - 2022 - 2021 - 2020 - 2019 -
Models from 9999
| 9999 AUDI AUDI |
Models from 2022
| 2022 AUDI A6 |
| 2022 AUDI A7 |
Models from 2021
| 2021 AUDI A6 |
| 2021 AUDI A6 ALLROAD |
| 2021 AUDI A7 |
Models from 2020
| 2020 AUDI A6 |
| 2020 AUDI A6 ALLROAD |
| 2020 AUDI A7 |
Models from 2019
| 2019 AUDI A6 |
| 2019 AUDI A7 |
PSS 01 3.0TFSI Bank 2 engine misfires - A6 and A7 01 21 02 2058038/3 April 7, 2021. Supersedes Technical Service Bulletin Group 01 number 20-86 dated September 3, 2020 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A6, A6 Avant, A6 allroad, A7, and A7 Sportback 2019 - 2022 All 3.0 TFSI Condition REVISION HISTORY Revision Date Purpose 3 - Revised header (Added MY) Revised Production Solution (Updated estimate) 2 09/03/2020 Revised Production Solution (Updated estimate) Revised Service (Adjusted Steps and updated with software release) 1 12/13/2019 Initial publication This PSS only applies if all of the following conditions are met, see Figure 1 for an example: MIL on, MIL flashing, or misfires reported by customer. Misfire DTCs are stored for more than one cylinder on Bank 2. DTC ambient conditions show misfires occurring at or near the same timestamp. DTC ambient conditions show misfires occur while engine operating condition is “Leerlauf” (idle in German). DTC ambient conditions show misfires occur when the vehicle is at or near 0 km/h speed. The vehicle is NOT currently misfiring when examined in the workshop. If all of the above criteria are not met, this PSS does not apply and the vehicle should be diagnosed using the normal GFF process. Page 1 of 3 © 2021 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Figure 1. Example of applicable DTC. Technical Background Software calibration causing misfire under certain running conditions using winter blend fuel (higher vapor pressure). This condition would occur mostly during winter months. Page 2 of 3 © 2021 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Production Solution Improved software in development pending 4th quarter of 2021. Service 1. If customer’s vehicle condition matches the conditions listed in this PSS TSB clear DTC’s and test drive vehicle. 2. If no faults return after the test drive, explain to the customer that a solution is forthcoming for the 4th quarter of 2021 and that no repairs are necessary at this point. Do not replace any components for this condition since this will not resolve the customer’s concern. 3. Create a PSS record in the PSS application through the Pending Service Solutions (PSS) link in AccessAudi (under Related Links >> Service), or through the Technical Assistance Page in Elsa. Warranty This TSB is informational only and not applicable to any Audi Warranty. Additional Information All parts and service references provided in this TSB (2058038) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2021 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 3 of 3 © 2021 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.