TJ31423.18.1-202

VOLVO CAR
SERVICE AND PARTS BUSINESS
Technical Journal
TITLE:
Blown fuse, compressor - air suspension
REF NO:
ISSUING DEPARTMENT:
CAR MARKET:
TJ 31423.18.1
Technical Service
United States and Canada
PARTNER:
ISSUE DATE:
STATUS DATE:
3 US 7510 Volvo Car USA
2021-02-25
2021-03-03
FUNC GROUP:
FUNC DESC:
7641
Level control, complete
Page 1 of 14
“Right first time in Time”
Attachment
File Name
Air suspension hoses to compressor.JPG
TJ 31423 - 1.jpg
TJ 31423 - 2.jpg
TJI-514118-1_1_0_en-US XC60.pdf
File Size
0.0679 MB
0.0325 MB
0.1334 MB
3.3795 MB
Rows beginning with * are modified
Note! If using a printed copy of this Technical Journal, first check for the latest online version.
DESCRIPTION:
* Customer Symptom Codes added.
If the air suspension system is not working due to a blown fuse for the compressor, then follow the
advice under Service section below.
CSC Customer Symptom Codes
Code
IV
8M
RA
Description
Text window and warning symbol/Text message
Warning lights and chimes/Other warning/chime problems
Active chassis function/Does not work
DTC Diagnostic Trouble Codes
Produced in the USA and available as an electronic document. Hard copy documents are printed in USA on recycled paper containing
a minimum of 50% wastepaper and 10% post-consumer waste.
© 2021 VOLVO CAR USA, LLC
Technical Journal 31423.18.1
Vehicle Type
Type
Eng
Eng
Desc
Sales
234
235
236
238
246
246
256
Body
Gear
Steer
Model Year
2017-2017
2017-2020
2017-2020
2018-2020
2018-2020
2018-2020
2016-2020
Plant
21
36
Chassis range
0000001-9999999
0000001-0134228
0000001-0109183
0000001-9999999
0000001-0516943
0000001-9999999
0000001-0582022
Struc Week
Range
201617-201752
201620-201948
201646-201948
201646-202008
201717-201948
201746-202011
201505-201948
SERVICE:
Perform fault tracing according to VIDA, secure that the fuse and relay are OK.
- Replace the compressor fuse 40A, PN 31346535
- Replace the compressor relay, PN 30765045
Test the complete air suspension system for leaks and/or squeezed hoses before replacing the
compressor. If no other issues are found, continue with compressor replacement.
- Replace compressor according to VIDA, VCC ID: VCC-479322-1
Improved compressors have been introduced in production in Torslanda (VCT) 19w48 and planned to be
introduced in Daqing (VCDQ) 20w08 and Chengdu (VCCD), Malaysia (VCMM) 20w11.
Note: The concerned fuse is located in the cargo area right side under the storage compartment, fuse
number 3, refer to picture TJ 31423 - 2.jpg.
On XC60 use the attached instruction TJI-514118-1_1_0_en-US XC60
Note. Pay attention to which hose is connected to where on the compressor. See attached picture, Air
suspension hoses to compressor.jpg. 										
VST Operation Number
VST Operation Number
98717-2
72812-2
36050-2
Description
Fuse replace acc. TJ31423
Compressor, air suspension
Calibrating/Identifying with VIDA
VEHICLE REPORT:
Yes, please submit a Vehicle Report if the service solution described in this TJ has no effect. Use concern
area “Vehicle Report” and sub concern area “Support not needed”, use function group 7641.
To view TJ attachments continue to next page. This TJ has four attachments.
Page 2 of 14
2021-03-03
Technical Journal 31423.18.1
2021-03-03
Page 3 of 14
Technical Journal 31423.18.1
Page 4 of 14
2021-03-03
Title
Action
Issue
1
Volvo Car Customer Service
Fuse
Replacement
Date
2018-10
Reason
First issue
Affected vehicles
Model year Model
2018, 2019 XC60 (18-)
Special tools
Description
PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
Designation
Interior trim remover
Part No.
999 5919
Equipment
Part No.
TJ Instruction VCC-514118-1
Page
1 ( 10 )
Operation number:
98717-2
TJ Instruction VCC-514118-1
Page 2 ( 10 )
Removal
Note! Removal steps in this procedure may
contain installation details.
Color symbols
Note! This colour chart displays (in colour
print and electronic version) the importance
of the different colours used in the images
of the method steps.
1 . Used for focused component, the
component with which you will do
something.
2 . Used as extra colors when you need to show
or differentiate additional parts.
3 . Used for attachments that are to be
removed/installed. May be screws, clips,
connectors, etc.
4 . Used when the component is not fully
removed from the vehicle but only hung to
the side.
5 . Used for standard tools and special tools.
6 . Used as background color for vehicle
components.
Set the vehicle to Inactive mode, described in
user mode , refer to:
General Information
3 - Electrical system
30 - General
300 - general
TJ Instruction VCC-514118-1
Page 3 ( 10 )
Remove the marked part.
Caution! Observe caution when carrying
out this step.
Remove the marked part.
TJ Instruction VCC-514118-1
Page 4 ( 10 )
Fold marked part to one side.
TJ Instruction VCC-514118-1
Page 5 ( 10 )
Remove the marked part.
Special Tool: T9995919, PULLER (SEALPINION,CAM-CRANKSHAFT)B200-6304
Remove the screw.
Torque:
M8 , 24 Nm
TJ Instruction VCC-514118-1
Page 6 ( 10 )
Remove the marked part.
Fold marked part to one side.
TJ Instruction VCC-514118-1
Page 7 ( 10 )
Remove the screw.
Use hands only.
Remove the marked part.
TJ Instruction VCC-514118-1
Page 8 ( 10 )
Release the catch.
Remove the marked part.
Loosen the clips.
Remove the marked part.
TJ Instruction VCC-514118-1
Page 9 ( 10 )
Disconnect the connector.
Loosen the clip.
Use: Interior trim remover
TJ Instruction VCC-514118-1
Page 10 ( 10 )
Note! The number of connectors may vary
depending on the vehicle's equipment level.
Disconnect the connector.
Remove the marked part.
Installation
To install, reverse the removal procedure.