S2108000064

Service Bulletin Details

Public Details for: S2108000064

Appearance of a coolant leak on the power pack unit (ppu) fitting due to assembly lubricant


- 2021 - 2020 -

Models from 2021
2021 JEEP WRANGLER
Models from 2020
2020 JEEP WRANGLER 
Case Number: S2108000064
Release Date:
3/9/2021
Symptom/Vehicle Issue: Appearance Of A Coolant Leak On The Power Pack Unit
(PPU) Fitting Due To Assembly Lubricant
Discussion: Upon examining the PPU or underside of the vehicle, you may discover
the appearance of a green discharge at the PPU coolant fitting. The green substance
is often associated with Coolant, but is actually lubricant used in the assembly of the
PPU. This is normal and does not indicate a leak. The PPU or any of its associated
coolant lines SHOULD NOT BE REPLACED for this condition.
Green Assembly Lubricant On PPU Coolant Fitting
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online
does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear
to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the
appropriate course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA US LLC
Version 4.3 10/28/2020

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.