No. 1-21

Installation and Conversion Instructions
Macan (95B)
1/21
ENU
9163
9
PORSCHE Front Camera (Dashcam)
Information:
Retrofitting
Figure 1
Model Year:
As of 2019
Note:
The Porsche front camera (dashcam  Figure 1) is affixed to the LEFT of the interior mirror (viewed in
direction of travel) on the windscreen and is connected to the vehicle electrical system.
It is ideal for making video recordings of driving situations and while parking. It can be configured and
operated using a related app on your smartphone.
Recorded videos are stored on the supplied SD card and previous recordings are overwritten.
If the dashcam detects a shake/vibration or if the radar sensor is triggered, the recorded video is stored
separately and not overwritten. Recordings can be downloaded directly from the SD card or via the app.
Tequipment
Apr 16, 2021
Page 1 of 21
9
Macan (95B)
9163
ENU
1/21
Installation and Conversion Instructions
Information
Important information for customers/customer service advisors:
•
Ask customers to download and install the "Porsche Dashcam App" from the App Store (Apple or
Google Play) on their device (smartphone/tablet) in advance.
For vehicle handover:
•
Together with the customer, check whether a firmware update via "Porsche Dashcam App" is
necessary. Perform the firmware update together if necessary.
•
Together with the customer, choose the "Region/State/Country" by selecting the relevant flag and
format the SD card.
Further information for customers:
Parts Info:
•
The customer is responsible for choosing the right "Region/State/Country"!
•
After crossing a national border: Update the "Region/State/Country" (see also conditions of use for
this topic)!
9Y0.044.930
 PORSCHE front camera (dashcam), set
Parts List:
Figure 2
Apr 16, 2021
Page 2 of 21
Tequipment
Installation and Conversion Instructions
———
Repair Kits:
1x
Macan (95B)
1/21
ENU
9163
9
3M privacy film (front & rear camera)  Figure 2 -1-
———
1x
Front camera  Figure 2 -2-
———
1x
———
1x
———
1x
———
3x
Micro SD memory card (32 GB, plugged into front camera) 
Figure 2 -3Front camera retainer plate assembly with wire harness  Figure
2 -4Wire harness assembly with connector (3-pin, wire approx. 4 m
long)  Figure 2 -5Protective foam (∅ approx. 29 x 74)  Figure 2 -6-
———
7x
Tie-wrap, 145 x 3.6 x 1.1  Figure 2 -7-
N .907.326.01
4x
Socket contact, 4.8 x ∅ 1.0 mm²  Figure 2 -8-
N .907.327.01
2x
N .906.844.01
3x
999.650.136.22
4x
Socket contact, 4.8 x ∅ 2.5 mm² (standard power timer) 
Figure 2 -9Socket contact, 2.8 x ∅ 1.0 mm² (junior power timer)  Figure 2
-10Socket contact, 5.0 x ∅ 1.0 mm²  Figure 2 -11-
N .017.506.5
2x
Cable ring eyelet, A6  Figure 2 -12-
992.971.859.B
2x
Cable ring eyelet, M8  Figure 2 -13-
N .102.615.01
2x
Blade-type fuse, 5 amp (mini)  Figure 2 -14-
N .017.131.16
2x
Blade-type fuse, 5 amp  Figure 2 -15-
———
1x
PORSCHE dashcam operating instructions  Figure 2 -16-
ONLY order when replacing the windscreen/rear window:
9Y0.044.931
1x
"Adhesive pad" repair kit, includes:
———
1x
———
1x
Adhesive pad for front camera retainer plate (grey) on backing
sheet
Adhesive pad for rear camera (grey)
———
1x
3M privacy film (front & rear camera)  Figure 2 -1-
ONLY order if front camera "wiring harness" is damaged:
9Y0.044.931
1x
"Adhesive pad" repair kit
9Y0.044.932
1x
Wiring harness repair kit, includes:
———
1x
———
1x
———
3x
Front camera retainer plate assembly with wire harness
(WITHOUT adhesive pads, similar to  Figure 2 -4-)
Wire harness assembly with connector (3-pin, wire approx. 4 m
long)  Figure 2 -5Protective foam (∅ approx. 29 x 74)  Figure 2 -6-
———
7x
Tie-wrap, 145 x 3.6 x 1.1  Figure 2 -7-
———
1x
Bag with socket contacts, cable ring eyelets and fuses  Figure
2 -8-15-
Tequipment
Apr 16, 2021
Page 3 of 21
9
Macan (95B)
9163
ENU
Installation and Conversion Instructions
1/21
Technical
details:
•
•
•
•
•
•
•
Materials:
———
1x
Auxiliary line (Tekalan or Teflon hose) approx. 1,500 mm long
———
1x
Wrapping/insulating tape (commercially available)
———
1x
Cleaning cloth (commercially available)
———
1x
Isopropanol (commercially available)
Tools:
Video recording in Quad High Definition (QHD)
Lens with polarization filter to reduce reflections and improve colours and contrasts
Audio recording (can be deactivated)
Global positioning system (GPS) sensor
Vibration sensor
Radar sensor for video recording when an object is approaching the vehicle
Bracket for the windscreen for fixed mounting on the vehicle
9900 - PIWIS Tester 3
Tablet, smartphone or PC with Internet access
Marking pencil/chalk
Flashlight
Plastic squeegee
Installing:
Apr 16, 2021
Page 4 of 21
1
Preparatory work
1.1
Clean inside and outside of the windscreen.
1.2
Connect battery charger.  Workshop Manual '2X00IN Work instructions after disconnecting the battery'.
1.3
Expose front roof/(interior) rear-view mirror area
1.3.1
Remove front roof console.  Workshop Manual '708319 Removing and installing
front roof console'
1.3.2
Remove (left) sun visor.  Workshop Manual '682319 Removing and installing sun
visor'
1.3.3
Remove front (left) grab handle.  Workshop Manual '683519 Removing and
installing front grab handle'
Tequipment
Installation and Conversion Instructions
1.4
Macan (95B)
1/21
ENU
9163
9
Expose (left) A-pillar area
1
2
3
– Dashboard trim panel
– Air vent (instrument cluster)
– Trim panel under dashboard
1.4.1
Remove dashboard trim panel (at
the left  Figure 3).  Workshop
Manual '701619 Removing and
installing dashboard trim panel'
1.4.2
Remove front side-section trim
panel (at the left).  Workshop
Manual '702419 Removing and
installing front side-section trim panel'
Figure 3
1.4.3
Remove (left) A-pillar trim panel  Workshop Manual '705719 Removing and
installing A-pillar trim panel'
1.4.4
Remove front inner door sill trim
( Figure 4) (  Workshop Manual
'680519 Removing and installing
front inner door sill trim').
1
2
– Front lid release
– Front inner door sill trim
(on driver's side)
Figure 4
1.5
Expose fuse box on dashboard (at the left)
1
2
3
4
1.5.1
1.5.2
–
–
–
–
Air vent (instrument cluster)
Dashboard moulding (right)
Air vent unit (PCM)
Trim panel under dashboard
Remove trim panel under
dashboard on driver's side (
Figure 5 -4-).  Workshop Manual
'701919 Removing and installing
trim panel under dashboard on
driver's side'
Figure 5
Loosen fuse box on dashboard (at the left).  Workshop Manual '978409
Loosening and securing fuse box'
Tequipment
Apr 16, 2021
Page 5 of 21
9
Macan (95B)
9163
ENU
1.6
2
Installation and Conversion Instructions
1/21
Detach front roof trim panel.  Workshop
Manual '708419 Removing and installing headliner'
Install PORSCHE front camera (dashcam) in the
vehicle
Overview of installation position  Figure 6
1
2
3
4
5
2.1
– Interior mirror
– Installation position of PORSCHE front
camera (dashcam)
– Electric wire harness
– Fuse box on dashboard (at the left)
– Ground pin
Position front camera (dashcam) to the LEFT
of the interior mirror on the windscreen
Figure 6
2.1.1
Install retainer plate with wire
harness on the base of the front
camera until the locking mechanism
engages ( Figure 7).
1
2
– Retainer plate with wire
harness
– Front camera base
Figure 7
Apr 16, 2021
Page 6 of 21
Tequipment
Installation and Conversion Instructions
2.1.2
1/21
ENU
9163
9
Trace the outline of the interior
mirror ( Figure 8 -1-) on the
outside of the windscreen using a
marking pencil/chalk.
1
2
3
4
X
Z
2.1.3
Macan (95B)
– Outline of interior mirror
– Outline of front camera
base
– Interior mirror
– Front camera
– approx. 230 mm
– approx. 90 mm
Copy dimensions X and Z on the
windscreen ( Figure 8 -top-).
Dimension X = distance from lower
edge of outline of front camera
base to edge of roof: Length 230
mm +/-5 mm
Figure 8
Dimension Z = distance from inner edge of outline of front camera base to inner
edge of outline of interior mirror: Length 90 mm +/-3 mm
Information
Observe the following points during positioning/alignment:
2.2
•
Sufficient distance between front camera and interior mirror base: at least 5
mm!
•
Get another person standing in front of the vehicle to check and confirm the
horizontal alignment of the camera with the PORSCHE logo!
2.1.4
Position front camera with retainer plate in the vehicle at the marking on the windscreen ( Figure 8 -Arrows-).
2.1.5
Get another person to trace and shade in the outline of the retainer plate on the
outside of the windscreen using a marking pencil/chalk.
2.1.6
Clean the inside of the windscreen in the bonding area for the retainer plate
(shaded area) to remove any dust and grease.
Install front camera (dashcam) on the windscreen
NOTICE
Adhesive films not prepared/installed correctly
•
Damage to adhesive films
•
Inadequate adhesion of adhesive films
Tequipment
Apr 16, 2021
Page 7 of 21
9
Macan (95B)
9163
ENU
Installation and Conversion Instructions
1/21

Carefully clean the areas on which you intend to stick the film to ensure that all traces
of oil, grease and silicone are completely removed.

Do not touch the bonding surfaces.

Object (adhesive film, vehicle, etc.) and ambient temperature: Minimum temperature
15°C .
2.2.1
Pull 3M privacy film off the backing
sheet ( Figure 9).
1
2
3
– 3M privacy film
– Marked bonding surface
– Interior mirror base
2.2.2
Position 3M privacy film on the
marked bonding surface on the
windscreen ( Figure 9) and stick it
on.
2.2.3
Carefully affix 3M privacy film using
a plastic squeegee, starting from
the center and moving towards the
edge.
Figure 9
Apr 16, 2021
Page 8 of 21
Tequipment
Installation and Conversion Instructions
2.2.4
Macan (95B)
1/21
ENU
9163
9
Pull protective film off the front
camera retainer plate ( Figure
10 -top-).
1
2
3
4
–
–
–
–
Protective film
Front camera
3M privacy film
Interior mirror
Information
Observe the following points during
positioning/alignment:
•
Sufficient distance between
front camera and interior
mirror base: at least 5 mm!
•
Get another person standing in
front of the vehicle to check
and confirm the horizontal
alignment of the camera with the PORSCHE logo!
Figure 10
Align front camera with retainer plate symmetrically with respect to the 3M privacy
film ( Figure 10 -bottom-).
2.2.5
3
Press front camera with retainer plate firmly onto the 3M privacy film on the windscreen.
Route and connect electric wire harness
1
2
3
4
5
– Interior mirror
– Installation position of PORSCHE front
camera (dashcam)
– Electric wire harness
– Fuse box on dashboard (at the left)
– Ground pin
Line routing ( Figure 11):
•
Front camera → headliner/roof console →
along windscreen frame → left A-pillar (top) →
along A-pillar → fuse carrier on dashboard, left
→ ground pin 21 (LHD)
Figure 11
Information
Route electric wire harness along existing wiring, if installed.
Make sure that safety components (airbags, etc.) are still working correctly!
Tequipment
Apr 16, 2021
Page 9 of 21
9
Macan (95B)
9163
ENU
3.1
Installation and Conversion Instructions
1/21
Routing wire harness
3.1.1
On the connector side, push one
protective foam roll onto the wire
harness for the front camera
retainer plate and the (3-wire) wire
harness.
1
2
3
4
– Protective foam roll
– Wire harness on front
camera retainer plate
– Wire harness (3-wire)
– Branch for 2nd camera
3.1.2
Connect plug connection (3-pin) (
Figure 12 -Arrows-).
3.1.3
Guide wire harness for front camera (dashcam) vertically with respect to the
headliner/roof console.
3.1.4
Push protective foam roll over the
(3-pin) plug connection.
1
2
3
Figure 12
– Wire harness for front
camera (dashcam)
– Protective foam roll
– Tie-wrap
Secure (3-pin) plug connection to
existing components/lines under
the headliner in the roof console
area with tie-wraps ( Figure 13).
3.1.5
Apr 16, 2021
Page 10 of 21
Figure 13
Tie back branch for 2nd camera (
Figure 12 -4-) and secure it to existing components/lines in the roof console area
using another protective foam roll.
Tequipment
Macan (95B)
Installation and Conversion Instructions
3.1.6
ENU
9163
9
Route the rest of the wire harness
as follows:
1
2
•
3.2
1/21
– Wire harness for front
camera (dashcam)
– Fuse carrier on dashboard
(left)
Roof console → under
headliner along windscreen
frame → left A-pillar (top) →
along A-pillar → fuse carrier on
dashboard (left  Figure 14)
→ BK 0.5² line → ground pin
21 (LHD)
Connect electric wire harness
Figure 14
Function/line:
Connection point on left-hand drive (LHD) vehicle
Ground
Terminal 31 = BK; 0.5²
Cable ring eyelet A6 (N .017.506.5) on
ground pin MB21 (left A-pillar)
Ignition positive
Terminal 15 = GN; 0.5²
Socket contact, 4.8 x ∅ 1.0 mm² (N.907.326.01)
in slot 9, fuses in row A (A9)
If used for ERA Glonass: Double connector on line RD/WH 0.5²
Permanent positive
Terminal 30 = RD; 0.5²
Socket contact, 4.8 x ∅ 1.0 mm² (N.907.326.01)
in slot 2, fuses in row C (C2)
3.2.1
Open fuse holders in row A and C.
3.2.2
Shorten lines GN; 0.5² and RD; 0.5² to the relevant fuse holders and crimp the
relevant contacts.
Tequipment
Apr 16, 2021
Page 11 of 21
9
Macan (95B)
9163
ENU
Installation and Conversion Instructions
1/21
3.2.3
Connect power supply as shown in
the table ( Figure 15).
1
2
3
4
– Fuse carrier on dashboard
(left)
– Line GN; 0.5² (terminal 15)
– Line RD; 0.5² (terminal 30)
– Line BK; 0.5² (terminal 31)
3.2.4
Close fuse holders in row A and
C and install with the fuse carrier
into the dashboard.  Workshop
Manual '978409 Loosening and
securing fuse box'
3.2.5
Protect the front camera power
supply with new fuse(s)  Figure 15
-A9 and C2-.
Fuse: Required value 5 A
3.2.6
Figure 15
Route line BK; 0.5² (terminal 31)
to the ground pin MB21, shorten it
and install it on the ground pin using
cable ring eyelet A6 ( Figure 16).
1
2
– Line BK; 0.5² (terminal 31)
– Ground pin MB21
(left-hand drive)
Tightening torque 9 Nm
(6.5 ftlb.)
3.3
4
Apr 16, 2021
Page 12 of 21
Secure routed wire harness to existing
lines/components in the vehicle with
tie-wraps without tensile stress and so that no
chafing occurs.
Concluding work in vehicle interior
4.1
Secure front roof trim panel.  Workshop
Manual '708419 Removing and installing
headliner'
4.2
Assemble fuse box area on the dashboard (left).
4.3
Assemble inner door sill trim and (left) A-pillar area.
4.4
Assemble (internal) rear-view mirror and front roof area.
Tequipment
Figure 16
Installation and Conversion Instructions
Coding:
5
Macan (95B)
1/21
ENU
9163
9
Code the PORSCHE front camera (dashcam) in Dealer mode
5.1
Preparatory work
1
2
3
4
5
6
5.2
–
–
–
–
–
–
PORSCHE front camera
Micro SD memory card (32 GB)
Retainer plate
Power button
WiFi status LED display
PRESS (release button)
5.1.1
Remove micro SD memory card (32
GB,  Figure 17 -2-) from card slot
for front camera.
5.1.2
Figure 17
With the ignition switched on, push
the front camera (dashcam  Figure 17 -1-) into the retainer plate on the windscreen ( Figure 17 -3-)
5.1.3
Press the power button ( Figure 17 -4-) for 10 seconds until you hear the second
double beeping sound.
5.1.4
The front camera (dashcam) starts in Dealer mode: WiFi LED ( Figure 17 -5-)
lights up "yellow".
Connect the front camera (dashcam) to the device (tablet, smartphone or PC)
Information
The "Dealer mode" network ID name ends with a "D". A password is NOT required!
The language setting can be changed by following the menu prompts after opening
the first page.
5.2.1
Search available networks for Dealer mode WiFi.
5.2.2
Open Dealer mode on the device (tablet, smartphone or PC) using any browser.
To do this, enter "192.168.1.1/diagnostics" in the browser's address line.
5.2.3
Displays in "Dealer mode" main menu:
Tequipment
Apr 16, 2021
Page 13 of 21
9
Macan (95B)
9163
ENU
Installation and Conversion Instructions
1/21
Options: ( Figure 18)
1
2
– Browser's address line
– "Options" menu item
Figure 18
Diagnostics: ( Figure 19)
1
2
5.3
– Browser's address line
– "Diagnostics" menu item
Basic settings for front camera (dashcam) in
the "Options" menu item ( Figure 18)
Figure 19
Apr 16, 2021
Page 14 of 21
Tequipment
Installation and Conversion Instructions
5.3.1
Macan (95B)
1/21
ENU
9163
9
Change the default language
"English" to the desired language:
1
2
– Default language "English"
– German
For example: German ( Figure
20)
•
Up to 19 different languages
can be selected.
Figure 20
Information
It is ONLY possible to select the country for the PORSCHE front camera (dashcam)
starting with the serial number "PDF2102*****"!
For cameras with serial numbers "PDF2101*****", the country can be selected
directly via the app on the customer's device (smartphone/tablet).
5.3.2
Select the country ( Figure 21).
1
2
3
•
•
•
– Serial number of front
camera (dashcam)
– Country
– Great Britain
Up to 48 countries are
currently available for
selection.
The Country selection screen
includes, for example: Units
of measurement, frequencies
Figure 21
and also legal regulations of
the respective country.
Macan:  Choose Region/State/Country by selecting the appropriate flag.
Tequipment
Apr 16, 2021
Page 15 of 21
9
Macan (95B)
9163
ENU
Installation and Conversion Instructions
1/21
5.3.3
Select the required camera channel
( Figure 22).
1
2
•
– Channel
– Front + Rear
TEQUIPMENT:  "Front Only"
(front camera) is preset.
Figure 22
Information
Check which vehicle electrical system battery is installed in the vehicle if necessary
by entering the vehicle identification number (VIN) in the Porsche Central Service
System (PCSS).
Background: The front camera shuts down if the correct battery voltage
(switch-off threshold) is not reached over a period of 5 minutes.
Apr 16, 2021
Page 16 of 21
•
Switch-off threshold for lead-acid battery (PbAcid) = 11 V
•
Switch-off threshold for lithium-ion battery (LiFePO) = 13 V
Tequipment
Installation and Conversion Instructions
5.3.4
Macan (95B)
1/21
ENU
9163
9
Select the battery type ( Figure
23)
1
2
•
•
– Battery
– PbAcid
Select the vehicle electrical
system battery installed in the
vehicle.
Macan:  Lead-acid battery
(PbAcid)
Figure 23
5.3.5
Select Park mode ( Figure 24)
1
2
•
•
– Park mode
– Off
Depending on the approval for
the respective vehicle.
Macan:  Select "On".
Figure 24
Tequipment
Apr 16, 2021
Page 17 of 21
9
Macan (95B)
9163
ENU
Installation and Conversion Instructions
1/21
5.3.6
Select the time limit ( Figure 25)
1
2
•
•
5.4
– Time limit until radar/video
is switched off
– 1 hour
Turn off radar/video monitoring in Park mode (battery
management). After the
selected time limit, fast
activation of the monitoring
system ONLY occurs if the
vehicle shakes/vibrates!
Macan:  Skip. Leave the
default setting.
Cancel Dealer mode (WiFi LED is still yellow)
5.4.1
Close the browser and switch off
ignition.
5.4.2
Pull the front camera (dashcam) off the retainer plate by pressing "PRESS" (release
button).
5.4.3
Insert micro SD memory card (32 GB) in the front camera (dashcam).
5.4.4
Install the front camera (dashcam) in the retainer plate.
Figure 25
5.5
The settings configured under Step 5.3 are set when the ignition is switched on again.
5.6
Format the micro SD memory card (32 GB)
5.6.1
Switch on ignition.
5.6.2
Press the power button quickly 6 times in a row within 3 seconds.
Announcements via front camera speaker: "Formatting..." and "Formatting
complete."
Apr 16, 2021
Page 18 of 21
Tequipment
Installation and Conversion Instructions
Diagnostics:
6
Macan (95B)
1/21
ENU
9163
9
Perform diagnostics on front camera (dashcam) – ONLY if necessary!
Information can be displayed, function tests can be run and results can be stored in the "Diagnostics"
menu item.
6.1
Information about the model name, hardware
and software version, radar and more
( Figure 26).
1
2
3
– Model name
– Hardware version
– Software version
Figure 26
6.2
Display of live images from front camera,
connection status, memory card status, GPS
and radar status and more ( Figure 27).
1
2
3
4
5
–
–
–
–
–
Front camera live image
Rear camera status (if installed)
Micro SD memory card contents
GPS status
GPS coordinates
Figure 27
Tequipment
Apr 16, 2021
Page 19 of 21
9
Macan (95B)
9163
ENU
6.3
Display of radar status, possible tests for
LED lights, loudspeaker and microphone
( Figure 28)
1
2
3
4
6.4
Installing:
7
Installation and Conversion Instructions
1/21
–
–
–
–
Radar status
LED Lights test
Loudspeaker test
Microphone test
The fault report can be stored on the micro
SD memory card (32 GB). To do this, use
micro SD memory card in Dealer mode and
select "Diagnostics" menu item in the front
camera.
Concluding work
7.1
Read out the fault memories of all systems,
work through any existing faults and erase
Figure 28
the fault memories.  Workshop Manual
'0X03IN Diagnostic maintenance: diagnostic system and maintenance inter…'
7.2
Disconnect the battery charger.  Workshop Manual '2X00IN Work instructions after
disconnecting the battery'.
7.3
Vehicle handover to customer
Information
Please pass all this information on to the customer.
Also give the customer the PORSCHE dashcam operating instructions.
Also give the first 3 pages of these Installation and Conversion Instructions to the customer.
Apr 16, 2021
Page 20 of 21
7.3.1
Download the app from the App Store to the customer's device
(smartphone/tablet).
7.3.2
Select and set Region/State/Country (flag) in the app on the customer's
smartphone/tablet.
7.3.3
Get the customer to perform a firmware update via the app if Step 5.3.2 (country
selection) could not be performed.
7.3.4
Format micro SD memory card (32 GB).
Tequipment
Installation and Conversion Instructions
91 63 23 40:
Macan (95B)
1/21
–Retrofitting PORSCHE front camera (dashcam) (1 x)–
Includes:
Installing retainer plate for PORSCHE front camera (dashcam)
on windscreen.
Routing and connecting electric wire harness.
Coding PORSCHE front camera (dashcam) in Dealer mode and
formatting micro SD memory card.
Reading out fault memories and correcting and deleting faults.
ENU
9163
9
Labor time: 263 TU
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2021 Porsche Cars North America, Inc.
Tequipment
Apr 16, 2021
Page 21 of 21