21-BE-007H
Service Bulletin Details
Public Details for: 21-BE-007H
Some 2021 elantra (cn7a) rear combination lamp turn signal light bulbs may prematurely become inoperative. This bulletin describes the procedure to replace the rear combination lamp turn signal light bulbs for both the right and left side.
- 2021 -
Models from 2021
2021 HYUNDAI ELANTRA |
GROUP BODY ELECTRICAL Technical Service Bulletin SUBJECT: DATE APRIL, 2021 NUMBER 21-BE-007H MODEL(S) ELANTRA (CN7a) REAR COMBINATION LAMP TURN SIGNAL BULBS REPLACEMENT Description: Some 2021 Elantra (CN7a) rear combination lamp turn signal light bulbs may prematurely become inoperative. This bulletin describes the procedure to replace the rear combination lamp turn signal light bulbs for both the right and left side. Applicable Vehicles: Certain 2021 MY Elantra (CN7a) Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair SUBJECT: REAR COMBINATION LAMP TURN SIGNAL BULBS REPLACEMENT Parts Information: PART NAME Turn Signal Light Bulb PART NUMBER PART IMAGE QTY. 18642-21007L 2 NOTE: Applies to both left and right side. Warranty Information: MODEL OP. CODE OPERATION Rear Combination Elantra (CN7a) 00DA41R0 Lamp Turn Signal Bulb Replacement OP. TIME CAUSAL PART NATURE CAUSE 0.3 M/H 18642-21007L I11 ZZ3 NOTE 1: Submit Claim on Campaign Claim Entry Screen. NOTE 2: If a part is found in need of replacement while performing the repair for this TSB, and the affected part is still under warranty, please submit a separate claim using the same Repair Order. If the affected part is out of warranty, submit a prior approval request for goodwill consideration prior to performing the work. NOTE 3: Please note that op code is for replacement of bulbs on both sides. Service Procedure: 1. Open the trunk to access the rear combination lamp assembly. 2. Remove the rear combination lamp cover. TSB #: 21-BE-007H Page 2 of 3 SUBJECT: REAR COMBINATION LAMP TURN SIGNAL BULBS REPLACEMENT 3. Remove the three 10mm nuts. 4. Carefully remove the rear combination lamp assembly. Remove and replace the turn signal light bulb. 5. Reinstall all parts in reverse order of removal. 6. Perform the same procedure to the other side to replace the turn signal bulb. 7. Confirm the turn signal of both the left and right sides are operating normally. TSB #: 21-BE-007H Page 3 of 3