21-001

Group 54 Chassis Electrical
Bulletin Number: 21-001 Models: FE
Issue Date: March 15, 2020
Page 1 of 5
SUBJECT:
FUSO FE Gas Rear Combination Turn Signal/Tail Lamp Replacement Connectors
MODELS:
FEC7T, FECZT, FEC9T
DESCRIPTION:
Rear combination turn signal/tail lamp replacement connector kits are now available to streamline connector repairs.
REPLACEMENT PARTS:
Connector Kit (Male) – MH050280 – 1 kit required per truck
Connector Kit (Female) – MH050294 – 1 kit required per truck
Crimp Connector (Duraseal) – MC037984-1 – 20 required per truck
Note: Each connector kit repairs 2 connectors. There are 12 wires in each kit. However, in this market, the turn
signal/tail lamp connectors are configured with only 5 wires, so there are 2 extra wires in each kit.
INSTALLATION INSTRUCTIONS:
See the installation instructions on the following pages.
Please note that any special tools needed to complete this repair must be procured locally.
Tail lamp connector installation
Tail lamp harness side wire need to be striped double length and need to
fold double back as per R&D’s feedback.
Harness
Repair harness side
Cut length L (mm)
Tail lamp harness side wire
14±1
7±0.5
Connector kit with Wires & Connector housing:
Rework method:
s
Tail lamp side wire need to be striped double length
and need to fold double back for better strength
Repair done (1 portion). Need 4-portion repair (LH and RH side- male and female
connections)