NTB21-032

Classification:
Reference:
AT21-002
Date:
NTB21-032
April 21, 2021
2021 ROGUE; WARNING LIGHTS FLASHING ON THE
INSTRUMENT PANEL WITH DTC P18A5 STORED
APPLIED VEHICLES:
2021 Rogue (T33)
IF YOU CONFIRM
The Electric Shift Control System and the Electronic Parking Brake System warning lights
are ON, with DTC P18A5 (AUTO PARK FUNCTION CANCEL) stored.
Electric Shift Control System warning light
Electronic Parking Brake System warning light
ACTION
1. Configure the TCM and ABS control unit (see Service Procedure on page 2).
2. Clear DTCs.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/10
SERVICE PROCEDURE
1.
Turn ON the hazard warning flasher lamps.
2.
Start CONSULT-III plus (C-III plus) and select Diagnosis (All Systems).
Figure 1
3.
Verify the VIN is correct and then select Confirm.
XXXXXXXXXXXXXXXXX
Figure 2
2/10
NTB21-032
4.
Select TRANSMISSION.
Figure 3
5.
Select CGW Information, and then CGW Open.
Figure 4
3/10
NTB21-032
6.
Login to NNA Federation.
Figure 5
7.
Confirm that the CGW Information icon is green.
Figure 6
4/10
NTB21-032
8.
Select Work support.
Figure 7
9.
Select CANCEL AUTOMATIC PARK FUNCTION, and then Start.
Figure 8
5/10
NTB21-032
10.
Select ON.
Figure 9
11.
Confirm that CANCEL AUTOMATIC PARK FUNCTION is “Off”, and then select End.
12.
Select the Back button.
Figure 10
6/10
NTB21-032
13.
Confirm that P18A5-00 is no longer present, and then select ABS.
This DTC
should not be listed
Figure 11
14.
Select Work support.
Figure 12
7/10
NTB21-032
15.
Select SYSTEM MODE CHANGE, and then Start.
Figure 13
16.
Select Off.
Figure 14
8/10
NTB21-032
17.
Confirm that the Current status is “Off”, and then select End.
18.
Select the Back button.
Figure 15
19.
Erase all DTCs.

Diagnosis (All Systems) > All DTC > ERASE
Figure 16
9/10
NTB21-032
CLAIMS INFORMATION
Submit a Primary Operation (PO) type line claim using the following claims coding:
DESCRIPTION
OP CODE
SYM
DIA
FRT
Update TCM & ABS to Customer Mode, Clear DTC’s
JX94AA
ZE
32
0.3
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
April 21, 2021
NTB21-032
DESCRIPTION
Original bulletin published
10/10
NTB21-032