NTB14074

Service Bulletin Details

Public Details for: NTB14074

If you confirm: if the customer states the mileage displayed for distance to empty (dte) changes abruptly or unexpectedly, up or down. - the customer may also describe the issue as dte mileage does not match or "agree with" the fuel gau


- 2014 - 2013 -

Classification:
EL14-021
Reference:
Date:
NTB14-074
July 31, 2014
PATHFINDER;
DISTANCE TO EMPTY MILEAGE ERRATIC BEHAVIOR
APPLIED VEHICLES: 2013 - 2014 Pathfinder (R52)
2014 Pathfinder Hybrid (R52)
APPLIED VINs and
DATES: All vehicles built before 5N1(*)R2M( * * )EC 696845 and
April 30, 2014
IF YOU CONFIRM:
If the customer states the mileage displayed
for Distance To Empty (DTE) changes
abruptly or unexpectedly, up or down.

The customer may also describe the
issue as DTE mileage does not match
or “agree with” the fuel gauge reading
for example, DTE shows 175 miles
while the fuel gauge shows ¼ full.
NOTE: This issue does not affect the
operation of the low fuel warning
system indicators or primary fuel
gauge.
Figure 1
ACTION:
Replace the combination meter assembly.

Refer to the Electronic Service Manual (ESM), section MWI-Meter, Warning Lamp
& Indicator, for replacement information.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
MODEL VEHICLE
DESCRIPTION
PART NUMBER
QUANTITY
INSTRUMENT COMB
2013-2014 Pathfinder
1
24810-9PA0D *
(combination meter)
INSTRUMENT COMB
1
2014 Pathfinder Hybrid
24810-9PC0A *
(combination meter)
* To order a combination meter, go to the MODEL ELECTRONICS, INC. website
(www.modelelectronics.com).
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace Combination Meter
(1)
RX4NAA
ZE
32
0.4
(1) Reference the PARTS INFORMATION Table and use the applicable INSTRUMENT
COMB part number as the Primary Failed Part (PFP).
IN COMBINATION WITH
Expense Code
EXPENSE
EXPENSE CODE
MAXIMUM AMOUNT
Calibrate Odometer
510
$20.33
Combination meter assembly
2/2
NTB14-074


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.