NTB14073

Classification:
Reference:
EL13-056
Date:
NTB14-073
July 31, 2014
PATHFINDER;
AUTOMATIC DRIVE POSITIONER LOSES MEMORY
APPLIED VEHICLE: 2013 - 2014 Pathfinder (R52)
APPLIED VINs and
DATES: Vehicles built before 5N1AR2M(* *)EC 681098 and March 13, 2014
NOTE: This bulletin does not apply to Pathfinder Hybrid.
IF YOU CONFIRM:
With the ignition turned ON, the following Automatic Drive Positioner (ADP) related items
operate as stated below:
 The driver’s seat, outside mirrors, and steering wheel will not adjust to preset
positions.
 Memory positions 1 and 2 do not work when their buttons are pressed.
 The LED memory position and set indicator light does not come on.
 The outside mirrors can NOT be adjusted with the power mirror switch.
 The driver’s seat and steering wheel can be adjusted with the steering wheel switch.
ACTION:
Replace the BCM.
 For BCM replacement procedure, refer to the M ELECTRICAL & POWER
CONTROL > BCS Body Control System section of the appropriate Electronic
Service Manual (ESM).
PARTS INFORMATION
DESCRIPTION
CONTROLLER ASSY - BCM
PART NUMBER QUANTITY
284B1-9NA1B
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
BCM-Replace
RX3UAA
1.0
(1)
ZE
32
BCM- Configuration
RX3U1A
0.2
(1) Refer to the electronic parts catalog (FAST) and use the BCM (284B1-XXXXX) as the
primary failed part (PFP).
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/1