NTB15063

Classification:
Reference:
EL15-019
Date:
NTB15-063
July 15, 2015
2016 MAXIMA; MANUAL CONFIGURATION OF BCM
APPLIED VEHICLE:
2016 Maxima (A36)
SERVICE INFORMATION
If after replacing a BCM and manual configuration needs to be performed, use the table
below:
CAUTION:
 Thoroughly read and understand the vehicle specification. ECU control may not
operate normally if the setting is not correct.

Never select any other value other than the “Setting value” shown below.

If only 1 item is present in the Setting value, only 1 choice is available for the
specific vehicle being configured.
BCM
SETTING ITEM
NOTE
Items
Setting value
RAIN SENSOR CONFIG
WITH  WITHOUT
• WITH: With rain detecting wipers
• WITHOUT: Without rain detecting wipers
CAN ERR DETECT
TELEMATICS
WITH  WITHOUT
• WITH: With Telematics
• WITHOUT: Without Telematics
DONGLE
WITH  WITHOUT
• WITH: With dongle (Canada)
• WITHOUT: Without dongle (USA)
INTELLIGENT KEY
SETTING ITEM
NOTE
Items
Setting value
Key Fob Type
LCK/UNLCK/TRNK  ENST/LCK/UNLCK/TRK/ALR
ANSWER BACK I-KEY
LOCK UNLOCK
BUZZER  OFF
• LCK/UNLCK/TRK: Without remote engine start
• ENST/LCK/UNLCK/TRK/ALRM: With remote engine start
• BUZZER: With answer back lock/unlock feature
• OFF: Without answer back lock/unlock feature
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/1